Brother Innov-is V5 User Manual Page 104
- Page / 312
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
SEWING THE STITCHES
S-36
■ Piecing
Sewing two pieces of fabric together is called
piecing. When cutting pieces for quilt blocks, make
sure the seam allowance is 6.5 mm (approx.
1/4 inch).
a
Select or and attach presser foot
“J”.
b
Align the edge of the fabric with the edge of
the presser foot, and start sewing.
* To sew a 6.5 mm (approx. 1/4 inch) seam allowance
along the right edge of the presser foot with
selected, the width should be set to 5.50 mm
(approx. 7/32 inch).
a 6.5 mm (approx. 1/4 inch)
* To sew a 6.5 mm (approx. 1/4 inch) seam allowance
along the left edge of the presser foot with
selected, the width should be set to 1.50 mm
(approx. 1/32 inch).
a 6.5 mm (approx. 1/4 inch)
* To change the needle position, use or in
the width display.
Rick-rack stitch
Decorative stitch
Decorative stitch
Hemstitching
Hemstitching
Single diamond
overcast
Overcasting stitch
Piecing stitch (Right)
Piecing stitch (Middle)
Piecing stitch (Left)
Hand-look quilting
Quilting appliqué zigzag stitch
Quilting appliqué stitch
Quilting stippling
Memo
• When a stitch pattern in the Quilting
Stitches category (Q-02 through Q-30) is
selected, a finer stitch width can be set than
is available with stitch patterns in other
categories.
For example: Stitch Q-03 has 57 needle
positions and stitch Q-19 has 29 width
selections.
Stitch Stitch name
Presser foot
Note
• The width range of stitch setting is only
available in the Quilting stitch “Q” quilting
category.
- Operation Manual 1
- TRADEMARKS 2
- 3Electrical Hazards: 3
- 7This machine is not a toy: 4
- 8For a longer service life: 4
- 9For repair or adjustment: 4
- SAVE THESE INSTRUCTIONS 5
- CONTENTS 7
- Chapter2 9
- ■ Front View 10
- ■ Right-side/Rear View 10
- Using the Flat Bed Attachment 13
- Included Accessories 14
- Brother dealer 16
- B Basic operations 18
- Getting Ready 18
- WARNING 19
- Basic operations B-19 21
- ■ Utility Stitch Screen 23
- Basic operations B-23 25
- Sewing settings 26
- LCD SCREEN 28
- Basic operations B-27 29
- “Shutoff Support Mode” 30
- USB Mouse Is Used 30
- Basic operations B-29 31
- Thumbnails 32
- Basic operations B-33 35
- Function 37
- Pulling Up the Bobbin Thread 45
- ■ Attaching the Walking foot 54
- About the Needle 56
- Embroidery Step by Step 58
- ■ Adjusting the LED Pointer 61
- ACCESSORY TO THE MACHINE 65
- Using a USB Mouse 66
- Feeding of the Dual Feed Foot 68
- Sewing Basics 70
- Automatic Reinforcement 73
- Stitching 73
- Sewing Lightweight Fabrics 77
- Sewing Stretch Fabrics 77
- Setting the Stitch Width 78
- Setting the Stitch Length 78
- Setting the Thread Tension 80
- USEFUL FUNCTIONS 81
- → The key appears as 84
- (Automatic Presser Foot 85
- Pressure) 85
- Sewing S-19 87
- Utility Stitches 88
- Selecting a Stitch 89
- Saving Your Stitch Settings 90
- ■ Retrieving Saved Settings 91
- Straight Stitches 92
- Dart Seam 96
- Gathering 97
- Flat Fell Seam 97
- Finished flat fell seam 98
- Zigzag Stitches 99
- Stitch) 100
- Zigzag Stitch) 100
- Elastic Zigzag Stitches 101
- Overcasting 101
- CAUTION 102
- Quilting 103
- ■ Piecing 104
- Sewing S-37 105
- Sewing S-39 107
- SEWING THE STITCHES 110
- Blind Hem Stitches 113
- Hem Fold 115
- Appliqué 116
- Shelltuck Stitches 117
- Scallop Stitches 118
- Crazy Quilting 118
- Smocking Stitches 119
- Fagoting 120
- Tape or Elastic Attaching 120
- One-step Buttonholes 123
- Bar Tacks 127
- ■ Attaching 4 Hole Buttons 130
- Multi-directional Sewing 131
- STITCH SETTING CHART 135
- Sewing S-69 137
- Sewing S-71 139
- Sewing S-73 141
- Sewing S-75 143
- S Sewing 144
- Character/Decorative Stitches 144
- SELECTING STITCH PATTERNS 145
- Example: Entering “Blue Sky” 146
- ■ Deleting Characters 147
- Example: 148
- Making Adjustments 150
- Sewing S-83 151
- EDITING STITCH PATTERNS 152
- Sewing S-85 153
- Checking the Image 156
- COMBINING STITCH PATTERNS 157
- Combining Large and Small 158
- Stitch Patterns 158
- Combining Horizontal Mirror 159
- Image Stitch Patterns 159
- Combining Stitch Patterns of 159
- Different Length 159
- ■ More Examples 161
- Stitch Data Precautions 162
- Machine’s Memory 163
- Computer 165
- USING THE MEMORY FUNCTION 166
- Recalling from USB Media 167
- Recalling from the Computer 168
- Sewing S-101 169
- MY CUSTOM STITCH 170
- DESIGNING A STITCH 171
- Examples of Custom Stitches 172
- ENTERING STITCH DATA 173
- ■ Moving a Point 175
- Use to move the point 176
- ■ Inserting New Points 177
- USING STORED CUSTOM STITCHES 178
- Retrieving Stored Stitches 179
- Embroidering 181
- E Embroidering 182
- Embroidery 182
- SELECTING PATTERNS 183
- Selecting Embroidery 184
- Patterns/Brother 184
- “Exclusives”/Floral 184
- Alphabet/Bobbin Work Patterns 184
- Selecting Character Patterns 185
- Selecting Frame Patterns 187
- Selecting Patterns from 187
- Embroidery Cards 187
- Selecting Patterns from USB 188
- Media/Computer 188
- Embroidering E-9 189
- ■ Key Functions 190
- ■ Inserting the Fabric 194
- ■ Using the Embroidery Sheet 195
- Fabric Edges 196
- Previewing the Completed 200
- Pattern 200
- Sewing Embroidery Patterns 203
- Which Use Appliqué 203
- Embroidering E-25 205
- If the Thread Breaks During 207
- Turning Off the Power 208
- Resuming Embroidery After 208
- Embroidering E-29 209
- Adjusting Thread Tension 210
- No Color on the Screw) 211
- Not to Trim 213
- Changing the Thread Color 214
- Display” 215
- Embroidering E-37 217
- Rotating the Pattern 218
- Creating a Horizontal Mirror 219
- Enlarging the Editing Screen 219
- Changing the Density 220
- Patterns Only) 220
- Character Patterns 220
- Embroidering E-41 221
- REVISING THE PATTERN 222
- Uninterrupted Embroidering 223
- (Monochrome - Using a Single 223
- USB Media 226
- Retrieving Patterns from the 228
- EMBROIDERY APPLICATIONS 231
- Embroidering E-53 233
- Embroidering E-55 235
- Embroidery Edit 236
- EXPLANATION OF FUNCTIONS 237
- SELECTING PATTERNS TO EDIT 238
- Embroidering E-59 239
- • When selecting , and 240
- EDITING PATTERNS 241
- Embroidering E-63 243
- Changing Character Spacing 244
- Reducing Character Spacing 245
- Patterns 245
- Changing the Color of Each 246
- Thread Table from the List 249
- USB media 250
- Choosing a Color from the 251
- Custom Thread Table 251
- Designing Repeated Patterns 252
- Embroidering E-73 253
- ■ Repeating One Element of a 254
- Repeated Pattern 254
- ■ Assigning Thread Marks 255
- Embroidering the Pattern 256
- Repeatedly 256
- Embroidering E-77 257
- Duplicating a Pattern 258
- After Editing 259
- Editing Combined Patterns 260
- Embroidering E-81 261
- Sewing Combined Patterns 263
- Basting Embroidery 264
- Appendix 267
- A Appendix 268
- How to Create Bobbin Work 268
- Required Materials 269
- Upper Threading 270
- Appendix A-7 273
- Bobbin Work Free Motion 277
- Selecting the Pattern 278
- Appendix A-15 281
- ADJUSTING THE SCREEN 288
- TROUBLESHOOTING 289
- ■ Symptom 290
- ■ Remedy/check details 290
- Appendix A-25 291
- Incorrect thread tension 292
- Appendix A-27 293
- List of Symptoms 296
- Appendix A-31 297
- Appendix A-35 301
- ERROR MESSAGES 302
- SPECIFICATIONS 303
- Upgrade Procedure Using USB 304
- Upgrade Procedure Using 305
- Printed in Taiwan 312
- XF3625-001 312
Related products and manuals for Sewing machines Brother Innov-is V5
Sewing machines Brother XN2500 User Manual
(48 pages)
(48 pages)
Sewing machines Brother 4234D User Manual
(80 pages)
(80 pages)
Sewing machines Brother PR-650 User Manual
(280 pages)
(280 pages)
Sewing machines Brother NX-2000 User Manual
(48 pages)
(48 pages)
Sewing machines Brother PR-650 User Manual
(40 pages)
(40 pages)
Sewing machines Brother PR655 User Manual
(280 pages)
(280 pages)
© 2020, manymanuals.com. All rights reserved. | 2.103 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals