Brother Innov-is V5 User Manual Page 115

  • Download
  • Add to my manuals
  • Print
  • Page
    / 312
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 114
SEWING THE STITCHES
Utility Stitches
Sewing S-47
S
2
k
Adjust the stitch width until the needle
slightly catches the fold of the hem.
a Needle drop point
When you change the needle drop point, raise the
needle, and then change the stitch width.
<Stitch width>
a Thick fabric
b Normal fabric
If the Needle Catches Too Much of
the Hem Fold
The needle is too far to the left.
Press to decrease the stitch width so that the
needle slightly catches the fold of the hem.
<Thick fabric>
<Normal fabric>
a Wrong side of fabric
b Right side of fabric
If the Needle does not Catch the
Hem Fold
The needle is too far to the right.
Press to increase the stitch width so that the
needle slightly catches the fold of the hem.
<Thick fabric>
Memo
Blind hem stitches cannot be sewn if the left
needle drop point does not catch the fold. If
the needle catches too much of the fold, the
fabric cannot be unfolded and the seam
appearing on the right side of the fabric will
be very large, leaving an unattractive finish.
If you experience either of these cases,
follow the instructions below to solve the
problem.
1
2
Page view 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 311 312

Comments to this Manuals

No comments