Brother NV1200 User Manual download pdf (Page 34)

Upper Threading 33

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Note

z If the needle was not completely threaded,

but a loop in the thread was formed in the

eye of the needle, carefully pull the loop

through the eye of the needle to pull out the

end of the thread.

CAUTION

Raise the presser foot lever, pass the end of the

thread through the presser foot, and then pull

out about 5 cm of thread toward the rear of

the machine.

a 5 cm

X The upper threading is finished.

Now that the upper threading and the lower

threading are finished, you are ready to

begin sewing.

Note

z If the needle is not raised, the needle

threader cannot thread the needle. Be sure

to press (Needle position button) to

raise the needle before using the needle

threader.

Threading the needle manually

(

without using the needle threader

)

When using special thread, thread with a thickness of

130/20 or thicker, the wing needle or the twin needle

which cannot be used with the needle threader,

thread the needle as described below.

Thread the machine to the needle bar thread

guide.

• For details, refer to “Upper Threading” (page

29).

Lower the presser foot lever.

a Pressor foot lever

Pass the thread through the eye of the needle

from front to back.

Raise the presser foot lever, pass the end of the

thread through the presser foot, and then pull

out about 5 cm of thread toward the rear of

the machine.

● When pulling out the thread, do not pull

it with extreme force, otherwise the

needle may break or bend.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 196 197

Comments to this Manuals

No comments

Brother NV1200 User Manual Page 34

Comments to this Manuals

Related products and manuals for Sewing machines Brother NV1200