Brother NV1200 User Manual download pdf (Page 37)

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Press (Back key).

X The initial screen appears again, and

appears.

CAUTION

Start sewing.

• For details on starting to sew, refer to

“Starting to sew” (page 51).

X Two lines of stitching are sewn parallel to

each other.

Note

z When changing the sewing direction, press

(Needle position button) to raise the

needle from the fabric, and then raise the

presser foot lever and turn the fabric.

CAUTION

Pulling up the bobbin thread

When making gathers or before free-motion quilting,

first pull up the bobbin thread as described below.

Insert the bobbin into the bobbin case.

• Refer to steps

a through e of “Installing the

bobbin” (page 27).

Pass the bobbin thread through the slot.

Do not cut the thread with the cutter.

While lightly holding the upper thread with

your left hand, press (Needle position

button) twice to raise the needle.

a Needle position button

X The bobbin thread is looped around the

upper thread and can be pulled up.

Carefully pull the upper thread upward to pull

out the end of the bobbin thread.

● When using the twin needle, be sure to

select the twin needle setting, otherwise

the needle may break or the machine may

be damaged.

● Do not try turning the fabric with the

twin needle left down in the fabric,

otherwise the needle may break or the

machine may be damaged.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 196 197

No comments

Brother NV1200 User Manual Page 37