Brother PT-2030AD User's Guide download pdf (Page 18)

Power Supply

GETTING STARTED

AC Adapter

Connect the AC adapter directly to the P-touch labeler.

Insert the plug on the AC adapter cord into the connector marked DC IN 9-9.5V

on the P-touch labeler.

Insert the AC adapter plug into a standard electrical outlet.

• Turn the P-touch labeler off before disconnecting the AC adapter.

• Do not pull or bend the AC adapter cord.

To safe guard and backup the labeler's memory, when the AC adapter is unplugged it is

recommended to have AA-size alkaline batteries (LR6) installed into the machine.

WARNING

• Use only the adapter, which is designed exclusively for your P-touch. Failure to observe

this may result in an accident or damage. Brother shall not assume any responsibility for

any accident or damage resulting from not using the specified AC adapter.

• Do not connect the AC adapter to a non-standard electrical outlet. Failure to observe this

may result in an accident or damage. Brother shall not assume any responsibility for any

accident or damage resulting from not using a standard electrical outlet.

CAUTION

• Disconnect the AC adapter from the P-touch and electrical outlet when you do not intend

to use the P-touch for an extended period.

• When power is disconnected for more than two minutes, all text and format settings will

be cleared. Any text files stored in the memory will also be cleared.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 65 66

No comments

Brother PT-2030AD User's Guide Page 18