Brother PT-7600 User's Guide download pdf (Page 21)

Getting Started

Notes on tape cassettes

☞ Before installing the tape cassette, make sure that the end of the tape feeds under the tape

guides.

☞ If the tape cassette to be installed has an ink ribbon and the ink ribbon is loose, use your

finger to wind the toothed wheel in the direction of the arrow on the cassette until there

is no slack in the ribbon.

☞ When inserting the tape cassette, make sure that the inner ribbon does not catch on the

corner of the metal guide.

☞ After installing a tape cassette and installing the back cover, press

f once to remove

any slack in the tape, and then press the tape cutter button to cut off the excess tape.

☞ Always cut off the tape before removing it from the machine. If the tape is pulled on

before being cut off, the tape cassette may be damaged.

Extra Strength Adhesive Tape

☞ For textured, rough, or slipping surface, we recommend using Extra Strength Adhesive

Tape.

☞ Although the instruction sheet included with the Extra Strength Adhesive

Tape cassette recommends cutting the tape with scissors, the tape cutter

that this P-touch labeller is equipped with is able to cut Extra Strength

Adhesive Tape.

End of the tape Tape guide

Toothed wheel

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 100 101

No comments

Brother PT-7600 User's Guide Page 21