Brother PT-7600 User's Guide download pdf (Page 85)

100

101

Appendix

Resetting the P-touch Labeller

You can reset the internal memory of your P-touch labeller when you want to clear all

saved label files, or in the event the P-touch labeller is not working properly.

1 Turn off the machine and then while holding down g and R, press o to

turn the machine back on.

2 Release g and R.

The P-touch labeller turns on with the internal memory reset.

Troubleshooting

☞ Release o before releasing the other keys.

☞ All text, format settings, option settings and stored label files (except for the Auto

Format templates), are cleared when you reset the P-touch labeller. Language and

unit settings will also be cleared.

Problem Cause Solution

The screen ‘locks’, or the

P-touch labeller does not

respond properly.

Refer to

Resetting the P-touch

Labeller above and reset the

internal memory to the initial

settings. If resetting the P-touch

labeller does not solve the problem,

disconnect the AC adapter and

remove the battery for more than

10 minutes.

The display remains blank

after turning on the

power.

Is the AC adapter connected

correctly?

Check that the AC adapter designed

exclusively for your P-touch

labeller is connected correctly.

Are you using the correct AC

adapter?

Make sure that you are using the

AD-18 designed exclusively for

your P-touch labeller (included in

package).

Is the battery installed correctly? Remove and re-install the battery.

Is the rechargeable battery pack

charged sufficiently?

The rechargeable battery pack’s

charge may be low. Charge the

rechargeable battery pack. (The

rechargeable battery pack’s charge

may run low even when you are not

using the P-touch labeller.)

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 100 101

Comments to this Manuals

No comments

Brother PT-7600 User's Guide Page 85

Comments to this Manuals

Related products and manuals for Label printers Brother PT-7600