Brother QL-1050N User's Guide download pdf (Page 59)

Available Commands

IntroductionCreating Labels (For Windows)Creating Labels (For Mac)Appendix

Fonts and several bar codes are embedded within this printer. You can send commands to print embedded

characters and barcodes.

Available Commands

Commands available are P-touch proprietary commands based on ESC/P.

For details, refer to the "Command Reference" included in the CD-ROM.

([CD Drive]:\Doc\Technical)

Serial Cables

The pin assignments for the serial cables (RS-232C cables) which can be used with this printer are shown in

the table below. You can purchase the cables at an electronics store. Do not use cables exceeding 3 meters

in length.

Brother QL-650TD/1050 side PC side

(D-sub female, lock screw #4-40 inch screw) (D-Sub9P female)

Controlling with the ESC/P Commands

• It is not possible to connect an RS-232C cable and a USB cable to the printer at the same time and use

it. Connect only one cable which is used to communicate with the printer.

• The RS-232C serial connector part of this equipment is not Limited Power Source.

Descriptions in this section apply only to the functions provided by the Brother

QL-650TD/1050/1050N. This function is not available for the QL-500/560.

Brother QL-650TD/

1050/1050N only

Signal

Name

Number

Pin Assignments

Number

Signal

Name

DCD 1 1 DCD

RXD 2 2 RXD

TXD 3 3 TXD

DTR 4 4 DTR

GND 5 5 GND

DSR 6 6 DSR

RTS 7 7 RTS

CTS 8 8 CTS

RI 9 9 RI

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 65 66 67

No comments

Brother QL-1050N User's Guide Page 59