Brother HL-3260N User's Guide Page 271
- Page / 276
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
APPENDICES
Appendix–29
• When EAN 8, EAN 13, or UPC A is selected with the parameter “t5” or “T5”:
Ten numerical characters “0” to “9” can be accepted as bar code data. The
number of characters for bar codes is limited as follows.
EAN 8: Total 8 digits (7 digits + 1 check digit)
EAN 13: Total 13 digits (12 digits + 1 check digit)
UPC A: Total 12 digits (11 digits + 1 check digit)
A number of characters other than above causes data error and the bar
code data is printed as normal print data. If the check digit is incorrect, the
printer calculates the correct check digit automatically so that the correct bar
code data will be printed. When EAN13 is selected, adding “+” and a 2-or 5-
digit number after the data can create an add-on code.
• When UPC-E is selected with the parameter “t6” or “T6”:
The numerical characters “0” to “9” can be accepted as bar code data.
(1) 8 digits Standard format. The first character
must be “0” and the data must be terminated by
a check digit.
Total 8 digits = “0” + 6 digits + 1 check digit.
(2) 6 digits The first character and the last
check digit are removed from the 8 digit data.
*1: For 8 digits, “?” can be used in place of a check digit.
*2: Adding “+” and 2- or 5-digit number after the data creates
an add-on code for all 6 and 8 digit formats.
• When Codabar is selected with the parameter “t9” or “T9”:
Characters “0” to “9”, “-”, “ . ”, “$”, “/”, “+”, “ : ” can be printed. Characters “A”
to “D” can be printed as a start-stop code, which can be uppercase or
lowercase. If there is no start-stop code, errors occur. A check digit cannot
be added and using “?” causes errors.
• When Code 128 Set A, Set B, or Set C is selected with the parameter “t12”
or “T12,” “t13” or “T13,” or “t14” or “T14” respectively:
Code 128 sets A, B and C are individually selectable. Set A encodes
characters Hex 00 … 5F. Set B encodes characters Hex 20 … 7F. Set C
encodes numeric pairs 00 … 99. Switching is allowed between the code
sets by sending %A, %B, or %C. FNC 1, 2, 3, and 4 are produced with %1,
%2, %3, and %4. The SHIFT code, %S, allows temporary switching (for 1
character only) from set A to set B and vice versa. The “%” character can be
encoded by sending it twice.
- HL-3260N 1
- Control panel 10
- SWITCHES 10
- REGULATIONS 11
- TABLE OF CONTENTS 11
- PRINTER SPECIFICATIONS 14
- PAPER SPECIFICATIONS 14
- SYMBOL/CHARACTER SETS 14
- For Finland and Sweden 19
- LUOKAN 1 LASERLAITE 19
- KLASS 1 LASER APPARAT 19
- CHAPTER 1 ABOUT THIS PRINTER 24
- Fig. 1-1 25
- ! What is on the CD-ROM 27
- 1 Install software 28
- 3 Brother Solutions Center 28
- 4 Maintenance Tutorial 28
- 5 Make Disk sets 28
- Fig. 1-3 29
- Fig. 1-4 30
- 1 Right cover 31
- 2 Lower right cover 31
- 3 Printer board cover 31
- 4 Power cord inlet 31
- Fig. 1-6 32
- Fig. 1-7 35
- Fig. 1-8 37
- Media type 38
- Recommended paper 39
- Plain paper 40
- Paper types to avoid 41
- Paper source Media 43
- ZAEY030E 45
- ZAEY052E 45
- ZAEY013E 46
- ZAEY021E 47
- ZAEY034E 47
- Fig. 1-17 48
- Fig. 1-18 48
- Fig. 1-19 48
- Fig. 1-20 49
- Fig. 1-21 49
- Fig.1-22 49
- Fig. 1-23 50
- Fig. 1-24 51
- Choose the Media Type 52
- Click OK 52
- Media sizes Media types and 53
- Fig. 1-27 54
- Fig. 1-28 54
- Labels and Transparencies 55
- 56
- Fig. 1-29 57
- ! Basic tab 61
- ! Advanced tab 62
- Device options 64
- Fig. 2-4 65
- ! Accessories tab 66
- ! Support tab 67
- ! Details tab 68
- ! Paper tab 69
- ! Graphics 70
- ! Device Options 71
- Job Spooling 72
- Automatic E-mail Printing 73
- Network Printer Driver Wizard 76
- ! Apple LaserWriter 8 Driver 78
- Fig. 2-11 79
- Fig. 3-1 85
- ! Reprinting the Last JOB 91
- ! Printing PROOF data 93
- ! Printing PUBLIC data 94
- ! Printing SECURE data 95
- ♦ To delete the job 97
- ♦ To cancel the reprint job 97
- ! To set numbers 98
- USER’S GUIDE 100
- ! READY - Green LED 101
- ! POWER - Green LED 101
- ! ALARM - Red LED 101
- ! DATA - Green LED 101
- ! Printer status messages 103
- CHAPTER 3 CONTROL PANEL 105
- ! Set date and time 116
- ! Set IP address 117
- ! About emulation modes 118
- ! List of Factory settings 120
- CHAPTER 4 OPTIONS 123
- Fig. 4-1 124
- Fig. 4-2 125
- Warning 127
- Fig. 4-3 128
- ZAEP480E 129
- ZAEP490E 129
- ZAEP040E 130
- ZAEP600E 130
- ZAEP050E 130
- ZAEP060E 131
- ZAEP070E 131
- ZAEP080E 132
- ZAEP082E 132
- ZAEP091E 132
- ZAEP671E 133
- ZAEP681E 133
- ZAEP100E 133
- Fig. 4-17 134
- ☞&'*(☞# 135
- ☞+" 135
- Fig. 4-18 137
- Fig. 4-19 137
- Fig. 4-20 138
- Fig. 4-21 138
- ZAEP650E 139
- Fig. 4-24 140
- Fig. 4-25 140
- Fig. 4-26 141
- Fig. 4-27 141
- Fig. 4-28 141
- ZAEP190E 142
- Fig. 4-32 144
- Fig. 4-33 145
- Fig. 4-34 145
- ZAEP210E 146
- Fig. 4-38 147
- Fig. 4-39 147
- ZAEP260E 148
- ZAEP280E 149
- Fig. 4-45 150
- Fig. 4-46 150
- 151
- 151
- 151
- Fig. 4-47 153
- Fig. 4-48 154
- Fig. 4-49 154
- Fig. 4-50 154
- Fig. 4-54 156
- Fig. 4-55 156
- ZAEP320E 157
- Fig. 4-59 159
- Fig. 4-60 159
- Fig. 4-61 160
- Fig. 4-62 161
- Fig. 4-63 162
- ZAEP440E 163
- Fig. 4-67 164
- Fig. 4-68 164
- ZAEP690E 165
- ♦ 166
- ♦ 166
- ♦ 166
- Fig. 4-72 167
- Fig. 4-73 168
- Fig. 4-74 168
- Fig. 4-75 169
- Fig. 4-76 169
- Fig. 4-77 170
- Fig. 4-78 170
- Fig. 4-79 170
- Fig. 4-80 171
- Fig. 4-81 171
- Fig. 4-82 171
- Fig. 4-83 172
- Fig. 4-84 172
- Fig. 4-85 174
- Fig. 4-86 174
- Fig. 4-88 175
- Fig. 4-89 175
- Fig. 4-87 175
- Fig. 4-90 176
- Fig. 4-91 176
- Fig. 4-92 177
- Fig. 4-93 177
- Fig. 4-94 178
- ♦ BR-Script 3 mode 179
- ♦ Duplex printing 180
- Fig. 4-95 181
- Fig. 4-96 181
- Fig. 4-97 182
- Fig. 4-98 182
- Fig. 4-99 183
- Fig. 4-100 184
- Fig. 4-101 184
- Fig. 4-102 185
- Fig. 4-103 185
- Fig. 4-104 185
- Fig. 4-105 186
- Fig. 4-106 186
- Fig. 4-107 186
- Fig. 4-108 187
- CHAPTER 5 MAINTENANCE 188
- Fig. 5-1 189
- ! Replacing the Toner bottle 191
- Fig. 5-5 192
- Fig. 5-6 192
- ZAET030E 193
- Close the Front cover 194
- ! Replacing the Drum unit 195
- ZAEM320E 196
- ZAEM330E 197
- ZAEM340E 197
- ZAEM360E 198
- ZAEM370E 199
- ZAEM410E 199
- ZAEM310E 199
- ZAEM380E 200
- ZAEM400E 202
- ZAEM090E 202
- ZAEM031E 203
- ZAEM101E 203
- ZAEM091E 204
- ZAEM141E 204
- ! Cleaning the Friction pad 205
- ZAEY012E 206
- ZAEY035E 206
- Fig. 5-36 208
- Fig. 5-37 208
- ZAEH190E 209
- ZAEH191E 209
- ZAEH200E 210
- CHAPTER 6 TROUBLESHOOTING 211
- ERROR ### 216
- SERVICE CALL 216
- Fig. 6-1 217
- Fig. 6-2 217
- Remove the jammed Staples 218
- Fig. 6-6 219
- ZAEH040E 220
- ZAEH041E 220
- ZAEP331E 221
- ZAEY190E 221
- Fig. 6-12 222
- ZAEP140E 223
- Fig. 6-15 224
- ZAEH051E 225
- ZAEH060E 225
- Remove the jammed paper 226
- ZAEY080E 227
- Finisher 229
- Open the Lower right cover 2 230
- Fig. 6-31 231
- Fig. 6-32 231
- Fig. 6-33 231
- Close the Duplex unit 232
- Fig. 6-35 233
- Possible Cause Solutions 234
- Fig. 6-36 238
- Fig. 6-37 239
- Fig. 6-38 239
- Fig. 6-39 240
- Fig. 6-40 240
- Fig. 6-41 241
- HRC = OFF HRC = MEDIUM 241
- Fig. 6-42 241
- APPENDICES 242
- Appendix–1 243
- Appendix–2 244
- Appendix–3 245
- Appendix–4 246
- Appendix–5 247
- Appendix–6 248
- Appendix–7 249
- Appendix–8 250
- Appendix–9 251
- Appendix–10 252
- 253
- 253
- 253
- Appendix–12 254
- Appendix–13 255
- Appendix–14 256
- List of Symbol/Character Sets 257
- SETS” in Appendix 257
- HP LaserJet EPSON IBM 257
- Appendix–16 258
- Appendix–17 259
- Appendix–18 260
- Appendix–23 265
- Appendix–24 266
- Appendix–25 267
- Appendix–26 268
- Appendix–27 269
- Appendix–28 270
- Appendix–29 271
- Appendix–30 272
- Appendix–31 273
Related products and manuals for Laser/LED printers Brother HL-3260N
(35 pages)© 2020, manymanuals.com. All rights reserved. | 0.448 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals