Brother HL-L8250CDN User's Guide Page 118

  • Download
  • Add to my manuals
  • Print
  • Page
    / 221
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 117
General Information
111
3
Colour Correction 3
The output density and print position for each colour may vary depending on the machine's environment, such
as temperature and humidity.
Colour Calibration 3
Calibration helps you improve the colour density.
NOTE
If you are using the Windows
®
printer driver, the driver will get the calibration data automatically if both
the Use Calibration Data and Get Device Data Automatically check boxes are selected. The default
settings are On. See Colour Calibration on page 47.
If you are using the Macintosh printer driver, you must perform the calibration using the Status Monitor.
Turn on the Status Monitor, and then select Color Calibration from the Control menu. See Status Monitor
on page 82 for how to turn on the Status Monitor.
Calibrate
a Press a or b ( + or -) to choose Color Correction. Press OK.
b Press a or b ( + or -) to choose Calibration. Press OK.
c Press a or b ( + or -) to choose Calibrate. Press OK.
d Press a to choose Yes.
The machine performs the Calibration and then returns to Ready mode.
Reset
Reset the calibration parameters back to those set at the factory.
a Press a or b ( + or -) to choose Color Correction. Press OK.
b Press a or b ( + or -) to choose Calibration. Press OK.
c Press a or b ( + or -) to choose Reset. Press OK.
d Press a to choose Reset.
The LCD displays Accepted and then returns to Ready mode.
Page view 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 220 221

Comments to this Manuals

No comments