Brother HL-1200 User's Guide download pdf (Page 51)

General Information

Power On/Off key 3

Power On/Off key has the following functions:

 Power Off

Make sure that the machine is in the Ready mode, then hold down for about 2 seconds. All the LEDs

turn off when you enable the Power Off mode. For details about Power Off mode, see Auto Power Off

on page 47.

 Cancel printing

Cancel the current job being printed: Press and hold for about 2 seconds. The machine will then

eject the paper. The Error LED ( ) and Ready LED ( ) will light up alternately. Then release .

Cancel all the received jobs: To delete all jobs, cancel the current job first following the procedure above.

While all the LEDs light up alternately, press again. All the LEDs will keep on lighting up alternately

as the job(s) is being canceled.

 Error recovery

If there is an error, the machine will recover automatically from some errors. If an error is not automatically

cleared, press to clear the error, and then continue to use the machine.

 Form feed

If the Ready LED ( ) blinks for a long time, press . The machine will print any data that is left in the

machine’s memory.

1 ... 50 51 52 ... 81

No comments

Brother HL-1200 User's Guide Page 51