Brother HL-1200 User's Guide download pdf (Page 71)

Troubleshooting and other information

Machine Information A

Default settings A

The machine has three levels of default settings; the default settings have been set at the factory before

shipment.

 Network Reset (HL-1210W and HL-1211W only)

 Factory Reset

 Settings Reset

NOTE

• You cannot modify the preset default settings.

• Page counters can never be changed.

Network Reset (HL-1210W and HL-1211W only) A

To reset only the print server back to its default settings (by resetting all network information such as the

password and IP address), follow these steps:

a Turn the machine off.

b Make sure that the top cover is closed and the power cord is plugged in.

c While holding down , open and close the top cover once.

d Release . Make sure that all the LEDs turn off.

e Press six times. Make sure that all the LEDs light up to indicate the machine has been reset to its

network default settings. The machine will restart.

Factory Reset A

You can partially reset the machine back to its default printer settings:

a Turn off the machine.

b Make sure that the top cover is closed and the power cord is plugged in.

c While holding down , open and close the top cover once.

d Release . Make sure that all the LEDs turn off.

e Press eight times. Make sure that all the LEDs light up to indicate the machine has been reset to

its factory default settings. The machine will restart.

1 ... 70 71 72 ... 81

No comments

Brother HL-1200 User's Guide Page 71