Brother HL-5270DN User Manual download pdf (Page 59)

Appendix A

A - 3

If the rarp daemon is not already running, start it (depending on the system the command can be rarpd,

rarpd -a, in.rarpd -a or something else; type man rarpd or refer to your system documentation for

additional information). To verify that the rarp daemon is running on a Berkeley UNIX

-based system, type

the following command:

ps -ax | grep -v grep | grep rarpd

For AT&T UNIX

-based systems, type:

ps -ef | grep -v grep | grep rarpd

The Brother print server will get the IP address from the rarp daemon when the printer is powered on.

Using APIPA to configure the IP address

The Brother print server supports the Automatic Private IP Addressing (APIPA) protocol. With APIPA, DHCP

clients automatically configure an IP address and subnet mask when a DHCP server is not available. The

device chooses it's own IP address in the range 169.254.1.0 through to 169.254.254.255. The subnet mask

is automatically set to 255.255.0.0 and the gateway address is set to 0.0.0.0.

By default, the APIPA protocol is enabled. If you want to disable the APIPA protocol, you can disable it using

printer control panel. For more information, see Disabling the APIPA protocol on page 7-8.

If the APIPA protocol is disabled, the IP address of a Brother print server is 192.0.0.192. However, you can

easily change this IP address number to match with the IP address details of your network.

Using ARP to configure the IP address

If you are unable to use the BRAdmin application and your network does not use a DHCP server, you can

also use the ARP command. The ARP command is available on Windows

systems that have TCP/IP

installed as well as UNIX

systems. To use arp enter the following command at the command prompt:

arp -s ipaddress ethernetaddress

Where ethernetaddress is the Ethernet address (MAC address) of the print server and ipaddress is the

IP address of the print server. For example:

Windows® systems

Windows

systems require the dash "-" character between each digit of the Ethernet address.

arp -s 192.168.1.2 00-80-77-31-01-07

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 67 68

No comments

Brother HL-5270DN User Manual Page 59