Brother DB2-DD7100A Service Manual download pdf (Page 105)

15. Puller (commercially available)

SL-710A

15. Puller (commercially available)

DANGER

Wait at least 10 minutes after turning off the power switch and disconnecting the power cord from the wall outlet

before opening the face plate of the control box. Touching areas where high voltages are present can result in

severe injury.

15-1. Timing

Obtain the puller output from the CN15 connector on the

control circuit board.

• The puller is lowered after the 40th stitch from the

sewing start.

• After the sewing machine stops, it is raised together

with the automatic presser lifter, and then after 10

seconds it is lowered.

Note:

The 40th stitch and 10 seconds settings given above can

be changed by changing the parameter settings.

15-2. Connector

The following puller connector is provided.

Part name Part code

Puller connector assembly J03126-001

<Note>

If purchasing the connector as a single part from the

manufacturer, specify the following number.

Manufacturer MOLEX

Connector No. 5557-10R

Connector terminal 5556PBTL

Terminal puller 57031-6000

15-3. Binding the cord

Secure the puller cord (1) using a cable tie (2).

1869M

<CN15>

(1) Puller output

(6) Puller power supply

1870M

1871M

(1)

(2)

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 152 153

No comments

Brother DB2-DD7100A Service Manual Page 105