Brother FS-20 User Manual download pdf (Page 80)

APPENDIX ——————————————————————————————————————————————————————————————————————————————————————————————————————————

——

MAINTENANCE

Simple sewing machine maintenance operations are described below.

Cleaning the machine

surface

If the surface of the machine is dirty, lightly soak a

cloth in neutral detergent, squeeze it out firmly, and

then wipe the surface of the machine. After cleaning

it once with a wet cloth, wipe it again with a dry

cloth.

Cleaning the race

Sewing performance will suffer if dust collects in the

race; therefore, it should be cleaned periodically.

Switch the machine off and unplug it.

Raise the needle and the presser foot.

Loosen the presser-foot screw and the needle

clamp screw to remove the presser-foot

holder and the needle.

Slide the needle plate cover release toward

you to remove the needle plate cover.

a Needle plate cover

b Needle plate cover release

Remove the bobbin case.

Grasp the bobbin case, and then pull it out.

a Bobbin case

Use the cleaning brush or a vacuum cleaner to

remove any dust from the race and its

surrounding area.

a Cleaning brush

b Race

Note

● Do not apply oil to the race.

● Unplug the power supply cord before

cleaning the machine, otherwise injuries or an

electric shock may occur.

● Make sure you unplug the machine before

you clean it. Otherwise, you may get an

electric shock or be injured.

CAUTION

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 99 100

No comments

Brother FS-20 User Manual Page 80