Brother XR53 User Manual Page 40
- Page / 108
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
SEWING BUTTONHOLES AND BUTTONS ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
—
———————————————————————————————————————
—————
39
1 Buttonhole fine-adjustment screw
2 Left side
3 Buttonhole appearance
If the left side is too open, turn the buttonhole
fine-adjustment screw with a large
screwdriver in the
“–” direction.
If the left side is too tight, turn the buttonhole
fine-adjustment screw with a large
screwdriver in the
“+” direction.
• This adjustment ensures both sides of the
buttonhole are the same.
Sewing buttons
1
Measure the distance between the
buttonholes and mark the fabric. Then
adjust the stitch width so that it is the
same as the distance between the holes in
the button.
2
Turn off the machine.
3
Change the foot to the button sewing foot
“M”.
4
Place the darning plate on the needle plate.
5
Turn on the machine.
CAUTION
6
Put a button between the foot and the
fabric and make sure that the needle enters
the holes without hitting the button. If it
hits, see step
1
.
7
At a slow speed, sew about 10 stitches.
CAUTION
8
Pull the upper thread at the end of the
stitching to the wrong side of the fabric,
and then tie it with the bobbin thread.
X Use scissors to cut the upper thread and
the bobbin thread at the beginning of the
stitching.
Stitch
Name
Pattern
Stitch
Length
[mm
(inch)]
Stitch
Width
[mm
(inch)]
Foot Other
Zigzag
Stitch
F
(1/64)
Any
Button
Sewing
Foot
“M”
Darning
Plate
2
3
3
1
3
● Do not turn on the machine while
pressing down the foot controller.
● Make sure the needle does not hit the
button during sewing. The needle may
break and you may be injured.
- Operation Manual 1
- Manual de instrucciones 1
- DANGER - To 2
- WARNING - To 2
- SAVE THESE 3
- INSTRUCTIONS 3
- CONTENTS 4
- 1 KNOWING YOUR SEWING MACHINE 5
- THE MAIN PARTS 6
- USING YOUR SEWING MACHINE 7
- Main power and sewing 8
- Foot controller 8
- Checking the needle 8
- Replacing the needle 8
- Changing the presser foot 9
- THE CONTROLS 10
- Patterns and stitch names 11
- Stitch length dial 15
- Stitch width dial 15
- Reverse sewing lever 15
- THREADING THE MACHINE 16
- 1 Spring on the shaft 17
- 3 7-10 cm (3-4 inches) 17
- 1 1 cm (1/2 inch) 17
- Lower threading 18
- Lower threading (for 19
- Upper threading 20
- 1 Spring 21
- 1 Thread take-up lever 21
- 1 Needle bar thread guide 21
- 1 5 cm (2 inches) 21
- Using the needle threader 22
- (for models equipped with 22
- Drawing up the lower 23
- 1 Upper thread 24
- 2 Lower thread 24
- 2 SEWING BASICS 26
- Trial sewing 27
- Changing the sewing 27
- Sewing thick fabrics 27
- 1 Basting 28
- 1 Flat bed attachment 28
- Thread tension 30
- 3 BUILT-IN STITCHES 31
- Shell tuck stitching 33
- Elastic stitching 33
- Double action stitching 34
- Fagoting 34
- Overedge stitching 35
- Feather stitching 35
- Triple zigzag stretch 36
- Decorative stitching 36
- Making a buttonhole 37
- (1-step automatic 37
- Adjusting buttonholes 39
- Sewing buttons 40
- 5 USING ATTACHMENTS AND 41
- APPLICATIONS 41
- Gathering 42
- Appliqués 42
- OPTIONAL ACCESSORIES 43
- Using the quilting guide 44
- Using the quilting foot 44
- Using the 1/4-inch 45
- Using the narrow hemmer 45
- 1 Needle 46
- 2 3 mm (1/8 inch) 46
- Using the blind stitch foot 47
- 6 APPENDIX 48
- TROUBLESHOOTING 50
- PELIGRO: para 54
- ADVERTENCIA: 54
- CONSERVE ESTAS 55
- INSTRUCCIONES 55
- CONTENIDO 56
- 1 CONOZCA SU MÁQUINA DE COSER 57
- COMPONENTES PRINCIPALES 58
- USO DE LA MÁQUINA DE COSER 59
- Comprobación de la aguja 60
- Cambio de la aguja 60
- Cambio del pie prensatela 61
- CONTROLES 62
- 27 puntadas 63
- Control de longitud de 67
- Control de anchura de 67
- Pulsador de retroceso 67
- ENHEBRADO DE LA MÁQUINA 68
- Enhebrado del hilo inferior 70
- (para los modelos equipados 71
- Enhebrado del hilo superior 72
- Recuerde 73
- Uso del enhebrador de aguja 74
- Procedimiento para tirar 75
- 1 Hilo superior 76
- 2 Hilo inferior 76
- Comienzo de la costura 78
- Costura de prueba 79
- Cambio de la dirección de 79
- Costura en telas gruesas 79
- Tensión del hilo 82
- 3 PUNTADAS DE COSTURA 83
- INCORPORADAS 83
- Costura de concha 85
- Costura elástica 85
- Costura de doble acción 86
- Costura de sobreorilla 87
- Costura de plumas 87
- Costura elástica en zig-zag 88
- Costura decorativa 88
- 4 COSTURA DE OJALES Y BOTONES 89
- Ajuste de ojales 91
- Costura de botones 92
- Costura de cremalleras 93
- Fruncidos 94
- Aplicaciones 94
- ACCESORIOS OPCIONALES 95
- Utilización de la guía de 96
- Utilización del pie para 96
- 2 3 mm (1/8 pulg.) 98
- MANTENIMIENTO 100
- PRECAUCIÓN 101
- SOLUCIÓN DE PROBLEMAS 102
- Printed in China 108
- XF4391-001 108
Related products and manuals for Sewing machines Brother XR53
Sewing machines Brother DZ820E User Manual
(24 pages)
(24 pages)
Sewing machines Brother XL 2600i User Manual
(82 pages)
(82 pages)
Sewing machines Brother XL-6562 User Manual
(101 pages)
(101 pages)
Sewing machines Brother NX-200 User Manual
(111 pages)
(111 pages)
Sewing machines Brother DZ1500F User Manual
(56 pages)
(56 pages)
(20 pages)
Sewing machines Brother NX-800 User Manual
(176 pages)
(176 pages)
Sewing machines Brother DZ3000 User Manual
(116 pages)
(116 pages)
Sewing machines Brother SB700T User Manual
(72 pages)
(72 pages)
© 2020, manymanuals.com. All rights reserved. | 0.086 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals