Brother XR53 User Manual Page 26
- Page / 108
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
SEWING BASICS ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
—
—————————————————————————————————————————————————————————————————————————————————————————————————
—————
25
2 SEWING BASICS
Please read before sewing
CAUTION
Starting sewing
1
Turn on the machine.
CAUTION
2
Raise the needle by turning the
handwheel toward you
(counterclockwise) so that the mark on
the wheel points up.
3
Turn the pattern selection dial to select a
stitch (see page 9 - 13).
4
Change the presser foot (see page 8).
5
Raise the presser foot lever.
1 Presser foot lever
6
Place the fabric under the presser foot,
pass the thread under the presser foot,
and then pull out about 5 cm (2 inches) of
thread toward the rear of the machine.
1 5 cm (2 inches)
● To avoid being injured, watch the needle carefully while you are using the machine. Keep
your hands away from moving parts.
● Do not stretch or pull the fabric during sewing, otherwise the needle may be damaged and
you may be injured.
● Do not use bent or broken needles, otherwise you may be injured.
● Take care that the needle does not hit basting pins or other objects during sewing. The needle
may break and you may be injured.
● Always use the correct presser foot. If you use the wrong presser foot, the needle may hit the
presser foot and bend or break and you may be injured.
● When you turn the handwheel by hand, always turn it toward you (counterclockwise).
Turning it the other way may cause the thread to tangle and damage the needle or fabric, and
you may be injured.
● Do not start sewing without placing the fabric under the presser foot, otherwise the presser
foot may be damaged.
● Do not turn on the machine while
pressing down the foot controller. The
machine may start unexpectedly and
cause personal injury or damage to the
machine.
1
1
- Operation Manual 1
- Manual de instrucciones 1
- DANGER - To 2
- WARNING - To 2
- SAVE THESE 3
- INSTRUCTIONS 3
- CONTENTS 4
- 1 KNOWING YOUR SEWING MACHINE 5
- THE MAIN PARTS 6
- USING YOUR SEWING MACHINE 7
- Main power and sewing 8
- Foot controller 8
- Checking the needle 8
- Replacing the needle 8
- Changing the presser foot 9
- THE CONTROLS 10
- Patterns and stitch names 11
- Stitch length dial 15
- Stitch width dial 15
- Reverse sewing lever 15
- THREADING THE MACHINE 16
- 1 Spring on the shaft 17
- 3 7-10 cm (3-4 inches) 17
- 1 1 cm (1/2 inch) 17
- Lower threading 18
- Lower threading (for 19
- Upper threading 20
- 1 Spring 21
- 1 Thread take-up lever 21
- 1 Needle bar thread guide 21
- 1 5 cm (2 inches) 21
- Using the needle threader 22
- (for models equipped with 22
- Drawing up the lower 23
- 1 Upper thread 24
- 2 Lower thread 24
- 2 SEWING BASICS 26
- Trial sewing 27
- Changing the sewing 27
- Sewing thick fabrics 27
- 1 Basting 28
- 1 Flat bed attachment 28
- Thread tension 30
- 3 BUILT-IN STITCHES 31
- Shell tuck stitching 33
- Elastic stitching 33
- Double action stitching 34
- Fagoting 34
- Overedge stitching 35
- Feather stitching 35
- Triple zigzag stretch 36
- Decorative stitching 36
- Making a buttonhole 37
- (1-step automatic 37
- Adjusting buttonholes 39
- Sewing buttons 40
- 5 USING ATTACHMENTS AND 41
- APPLICATIONS 41
- Gathering 42
- Appliqués 42
- OPTIONAL ACCESSORIES 43
- Using the quilting guide 44
- Using the quilting foot 44
- Using the 1/4-inch 45
- Using the narrow hemmer 45
- 1 Needle 46
- 2 3 mm (1/8 inch) 46
- Using the blind stitch foot 47
- 6 APPENDIX 48
- TROUBLESHOOTING 50
- PELIGRO: para 54
- ADVERTENCIA: 54
- CONSERVE ESTAS 55
- INSTRUCCIONES 55
- CONTENIDO 56
- 1 CONOZCA SU MÁQUINA DE COSER 57
- COMPONENTES PRINCIPALES 58
- USO DE LA MÁQUINA DE COSER 59
- Comprobación de la aguja 60
- Cambio de la aguja 60
- Cambio del pie prensatela 61
- CONTROLES 62
- 27 puntadas 63
- Control de longitud de 67
- Control de anchura de 67
- Pulsador de retroceso 67
- ENHEBRADO DE LA MÁQUINA 68
- Enhebrado del hilo inferior 70
- (para los modelos equipados 71
- Enhebrado del hilo superior 72
- Recuerde 73
- Uso del enhebrador de aguja 74
- Procedimiento para tirar 75
- 1 Hilo superior 76
- 2 Hilo inferior 76
- Comienzo de la costura 78
- Costura de prueba 79
- Cambio de la dirección de 79
- Costura en telas gruesas 79
- Tensión del hilo 82
- 3 PUNTADAS DE COSTURA 83
- INCORPORADAS 83
- Costura de concha 85
- Costura elástica 85
- Costura de doble acción 86
- Costura de sobreorilla 87
- Costura de plumas 87
- Costura elástica en zig-zag 88
- Costura decorativa 88
- 4 COSTURA DE OJALES Y BOTONES 89
- Ajuste de ojales 91
- Costura de botones 92
- Costura de cremalleras 93
- Fruncidos 94
- Aplicaciones 94
- ACCESORIOS OPCIONALES 95
- Utilización de la guía de 96
- Utilización del pie para 96
- 2 3 mm (1/8 pulg.) 98
- MANTENIMIENTO 100
- PRECAUCIÓN 101
- SOLUCIÓN DE PROBLEMAS 102
- Printed in China 108
- XF4391-001 108
Related products and manuals for Sewing machines Brother XR53
Sewing machines Brother DZ820E User Manual
(24 pages)
(24 pages)
Sewing machines Brother XL 2600i User Manual
(82 pages)
(82 pages)
Sewing machines Brother XL-6562 User Manual
(101 pages)
(101 pages)
Sewing machines Brother NX-200 User Manual
(111 pages)
(111 pages)
Sewing machines Brother DZ1500F User Manual
(56 pages)
(56 pages)
(20 pages)
Sewing machines Brother NX-800 User Manual
(176 pages)
(176 pages)
Sewing machines Brother DZ3000 User Manual
(116 pages)
(116 pages)
Sewing machines Brother SB700T User Manual
(72 pages)
(72 pages)
© 2020, manymanuals.com. All rights reserved. | 0.041 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals