Brother MFC-8510DN User Manual download pdf (Page 91)

Troubleshooting

83

B

Scan Unable XX The machine has a mechanical

problem.

 Turn the power switch off, and then turn it

on again.

(See Transferring your faxes or Fax Journal

report uu page 85.)

 If the problem continues, call Brother

Customer Service.

Document is too long for

duplex scanning.

Press Stop/Exit. Use the suitable size of paper

for duplex scanning.

(See Print media uu page 157.)

Size Error The paper size defined in the

printer driver is not usable for

the tray you use.

Choose a paper size which is supported by the

tray shown on the LCD.

(See Paper Size uu page 15.)

Size Error DX The paper size defined in the

printer driver and the control

panel menu is not available for

automatic duplex printing.

Press Stop/Exit. Choose a paper size which is

supported by the duplex tray.

The paper size you can use for automatic

duplex printing is A4.

The paper in the tray is not

correct size and is not usable

for automatic duplex printing.

Load the correct size of paper in the tray and

set the “Paper Size” (Menu, 1, 2, 2).

The paper size you can use for automatic

duplex printing is A4.

Size mismatch The paper in the tray is not the

correct size.

Load the correct size of paper in the tray and

set the “Paper Size” (Menu, 1, 2, 2).

(See Paper Size uu page 15.)

Toner Low If the LCD shows Toner Low

you can still print; however, the

machine is telling you that the

toner cartridge is near the end

of its life.

Order a new toner cartridge now so a

replacement toner cartridge will be available

when the LCD shows Replace Toner.

Too Many Files There are too many files stored

on the USB Flash memory

drive.

Reduce the number of files stored on the USB

Flash memory drive.

Unusable Device

Remove the

Device. Turn the

power off and

back on again.

A defective USB device or a

high power consumption USB

device has been connected to

the USB direct interface.

Unplug the device from the USB direct

interface. Turn the machine off and then on

aga

in.

Un

usable Device A USB device or USB Flash

memory drive that is encrypted

or not supported has been

connected to the USB direct

interface.

Unplug the device from the USB direct

interface.

(See the specifications for supported USB

Flash memory drives in Printing data from a

USB Flash memory drive or digital camera

supporting mass storage uu page 51.)

Error Message Cause Action

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 180 181

Comments to this Manuals

No comments