Brother PE-600II User Manual download pdf (Page 81)

OTHER BASIC PROCEDURES —————————————————————————————————————————————————

—

As shown in the illustration, press 1 to extend

the needle-mounting clamp 2. Attach the

clamp to the needle, and then release the

pressed area to clamp the needle. To unclamp

the needle, press 1 again.

While holding the needle in place with your

left hand, tighten the needle set screw.

Use the allen screw driver to turn the needle

set screw clockwise.

●

Be sure to insert the needle all the way

up until it touches the needle bar stopper

and securely tighten the needle set screw

with the allen screw driver, otherwise the

needle may break or the machine may be

damaged.

● If the needle is not fully inserted, the

hook of the automatic needle-threading

mechanism will not pass through the eye

of the needle during automatic needle

threading, and the hook may bend or the

needle cannot be threaded.

● If the hook of the automatic needle-

threading mechanism is bent or

damaged, contact your authorized

retailer.

CAUTION

Sapphire_brother.book Page 64 Thursday, November 17, 2005 2:48 PM

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 236 237

No comments

Brother PE-600II User Manual Page 81