Brother INTELLIFAX 3650 User Manual download pdf (Page 34)

I tLtHHUIMh hUNU I lUN bt 11ПМУЬ

4. FUNCTION SETTINGS

There are some settings, such as the date and time, you should set on your fax machine before

you begin using it. Once entered, these settings will remain in the machine until you change them.

You can begin customizing the settings by pressing Function on the control panel. This activates

the function mode and On-Screen Programming prompts. You can complete a variety of settings

in this mode.

Setting the Dialing Mode (TonelPulse)

____________________________

Your fax machine supports both tone (multi-frequency) and pulse (rotary) dialing. It is initially

set to TONE, so you do not have to change the setting if you use that kind of line. If you are using

a pulse dial line, you can change the setting to PULSE by following the steps below:

1. Press Function.

You will see scrolling options on the

display. You can choose one.

2. Press 6.

3. Press 1.

After two seconds you will be prompted

to select pulse or tone.

4. Press (left arro^v) or (right

arrow) to find the dialing mode

that matches your telephone line.

Example: PULSE.

5. Press Set.

6. Press Stop to return to the date

and time.

LOl/qi/1999 00:00 J

( 1.TEMP.SETTINGS )

i 6.TEL OPTIONS ]

( l.TONE/PULSE

[ DIALING:T0NE

i SELECT <- -> & SET )

( DIALING:PULSE )

( l.TONE/PULSE

Setting the Beeper Sound Level

If the beeper setting is LOW or HIGH, it will “beep” every time you pre.ss a key, make an error,

or at the end of sending or receiving a fax.

The initial setting on your fax machine for the beeper is LOW. If you do not want the beeper on,

select OFF, and if you want it loud, select HIGH.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 143 144

No comments

Brother INTELLIFAX 3650 User Manual Page 34