Brother DCP-8070D User's Guide download pdf (Page 17)

Chapter 2

10

c Fan the stack of paper well to avoid

paper jams and misfeeds.

d Put paper in the tray, and make sure that

the paper is below the maximum paper

mark (1). The side to be printed on must

be face down.

IMPORTANT

Make sure the paper guides touch the

sides of the paper so it will feed correctly.

e Put the paper tray firmly back in the

machine. Make sure that it is completely

inserted into the machine.

f Fold out the support flap (1) to prevent

paper from sliding off the face-down

output tray.

Loading paper in the

multi-purpose tray (MP tray) 2

You can load up to 3 envelopes or special

print media in the MP tray or up to 50 sheets

of plain paper. Use this tray to print or copy on

thick paper, bond paper, envelopes, labels or

transparencies.

Printing on thick paper, bond paper,

envelopes, labels and transparencies

2

Before loading, press the corners and sides

of the envelopes to make them as flat as

possible.

When the back output tray is pulled down, the

machine has a straight paper path from the

MP tray through to the back of the machine.

Use this paper feed and output method when

you want to print on thick paper, bond paper,

envelopes, labels or transparencies.

IMPORTANT

Remove each printed sheet or envelope

immediately to prevent a paper jam.

a Open the back cover (back output tray).

1

1

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 121 122

Comments to this Manuals

No comments