Brother DCP-8070D User's Guide download pdf (Page 98)

Troubleshooting and routine maintenance

Reset C

You can reset all the machine settings back to

the settings that were set at the factory.

Brother strongly recommends you perform

this operation when you dispose of the

machine.

Note

Unplug the interface cable before you

reset.

a Press Menu, 1, 7, 1.

b Press 1 or 2 to choose 1.Reset or

2.Exit.

c If you choose 1.Reset in step b, you

will be asked to reboot the machine.

Press 1 or 2 to choose 1.Yes or 2.No.

If you choose 1.Yes, the machine will

begin the Reset.

Packing and shipping

the machine C

CAUTION

Make sure that the machine has fully

cooled down by leaving it disconnected

from the power for at least 30 minutes

before packing.

When you transport the machine, use the

packing materials that came with your

machine. If you do not pack the machine

correctly, you could void your warranty.

a Turn off the machine.

b Unplug all the cables and AC power

cord from the machine.

c Press the front cover release button and

open the front cover.

d Take out the drum unit and toner

cartridge assembly. Leave the toner

cartridge installed in the drum unit.

e Put the drum unit and toner cartridge

assembly into a plastic bag and seal the

bag.

f Close the front cover.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 121 122

No comments

Brother DCP-8070D User's Guide Page 98