Brother DCP-8070D User's Guide download pdf (Page 60)

Memory board B

This machine has 64 MB of standard memory

and one slot for optional memory expansion.

You can expand the memory up to 576 MB by

installing small outline dual in-line memory

modules (SO-DIMM). When you add the

optional memory, it increases the

performance for both copier and printer

operations.

In general, the machine uses

industry-standard SO-DIMMs with the

following specifications:

Type: 144 pin and 64 bit output

CAS latency: 2

Clock frequency: 100 MHz or more

Capacity: 64, 128, 256 or 512 MB

Height: 31.75 mm

Dram Type: SDRAM 2 Bank

For purchasing information and part numbers

visit the Buffalo Technology website:

http://www.buffalo-technology.com/

Note

• There may be some SO-DIMMs that will

not work with the machine.

• For more information, contact your

Brother dealer.

Installing extra memory B

a Turn off the machine’s power switch.

b Disconnect the interface cable from the

machine, and then unplug the power

cord from the electrical socket.

Note

Be sure to turn off the machine’s power

switch before you install or remove the

SO-DIMM.

c Remove the SO-DIMM cover and

interface access cover.

Options B

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 121 122

No comments

Brother DCP-8070D User's Guide Page 60