Brother MFC-885CW User Manual download pdf (Page 23)

Installing the Driver & Software

21

Windows

®

USB

Windows

®

6 After reading and accepting the ScanSoft™

PaperPort™ 11SE License Agreement, click

Yes.

7 The installation of ScanSoft™ PaperPort™

11SE will automatically start and is followed by

the installation of MFL-Pro Suite.

8 When the Brother MFL-Pro Suite Software

License Agreement window appears, click Yes

if you agree to the Software License

Agreement.

Note

For Windows Vista™, when this screen appears,

click the check box and click Install to complete

the installation properly.

9 When this screen appears, go to the next step.

10 Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

11 Insert the USB cable into the USB socket

marked with a symbol. You will find the

USB socket inside the machine on the right as

shown below.

12 Carefully route the USB cable through the

trench and out the back of the machine as

shown below and connect the cable to your

computer.

Improper Setup

• DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

• Make sure you use a USB 2.0 cable that is no

longer than 6 feet (2 meters) long.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Comments to this Manuals

No comments