Brother MFC-J6520DW User Manual download pdf (Page 21)

Wi-Fi Direct™ network terms 4

Group Owner (G/O) 4

If you set Group Owner to On, your Brother machine serves as an access point when you configure a

Wi-Fi Direct™ network. The G/O assigns an SSID name, password and IP address for the Wi-Fi Direct™

network. The default setting is Off.

Device Information 4

Device Name 4

You can check the Brother machine's device name in the Wi-Fi Direct™ network environment. The device

name will be shown as MFC-XXXX or DCP-XXXX (where XXXX is your model name).

SSID 4

This field displays the current Wi-Fi Direct™ network SSID name. The display shows up to 32 characters of

the SSID name.

IP Address 4

This field displays the current IP address of the machine, as assigned by the G/O.

Status Information 4

Status 4

This field displays the current Wi-Fi Direct™ network status. When your machine is a G/O, it displays the

message G/O Active(**) (where ** is the number of connected clients). When your machine is a client,

the machine displays the message Client Active. If the machine displays Off, your machine’s Wi-Fi

Direct™ interface is disabled.

Signal 4

This field displays the current Wi-Fi Direct™ network signal strength.

Channel 4

This field displays the current Wi-Fi Direct™ network channel.

Speed 4

This field displays the current Wi-Fi Direct™ network speed.

I/F Enable 4

If you want to use the Wi-Fi Direct™ network connection, set I/F Enable to On.

Glossary 4

1 2 ... 16 17 18 19 20 21 22 23

No comments

Brother MFC-J6520DW User Manual Page 21