Brother DCP-387C User's Guide download pdf (Page 40)

Chapter 4

32

Using a scanned paper document as

your watermark

4

a Enter the number of copies you want.

b Press a or b to choose

Watermark Copy .

Press OK.

c Press d or c to choose On.

d Press a or b to choose

Current Setting .

Press OK.

e Press a or b to choose Scan. Press OK

and set the page that you want to use as

a watermark on the scanner glass.

f Press Mono Start or Colour Start.

g Take out the watermark document you

scanned and load the document you

want to copy.

h Press d or c to change the

Transparency of the watermark.

Press OK.

i If you do not want to change any

additional settings, press Mono Start or

Colour Start.

Note

You cannot enlarge or reduce the

scanned watermark.

Setting your changes as a

new default 4

You can save the copy settings for Quality,

Enlarge/Reduce, Brightness,

Contrast and Page Layout that you use

most often by setting them as the default

settings. These settings will stay until you

change them again.

a Press a or b to choose your new setting.

Press OK.

Repeat this step for each setting you

want to change.

b After changing the last setting, press a

or b to choose Set New Default.

Press OK.

c Press + to choose Yes.

d Press Stop/Exit.

Restoring all settings to the

factory settings 4

You can restore all the settings you have

changed back to the factory settings. These

settings will stay until you change them again.

a Press a or b to choose

Factory Reset .

Press OK.

b Press + to choose Yes.

c Press Stop/Exit.

Downloaded from ManualsPrinter.com Manuals

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 125 126

Comments to this Manuals

No comments