Brother DCP-J132W Setup Guide download pdf (Page 2)

2

a Remove the protective tape and film covering

the machine, and also from the LCD.

b

Remove

the plastic bag a containing the ink

cartridges from on top of the paper tray.

c Make sure you have all the components.

2

Connect the power cord

WARNING

The machine must be fitted with an earthed

plug.

a Connect the power cord.

3

Choose your language

a When the LCD shows this message, press OK.

Select Language

q

Press OK Key

b Press a or b to choose your language and

press OK.

English e

q

Select ab & OK

c Press a (Yes) to confirm the language setting.

NOTE

DO NOT connect the USB cable yet (if you are

using a USB cable).

1

(Example for UK)

NOTE

• The Warning LED on the control panel will stay

on until you have installed the ink cartridges.

• To prolong the life of the print head, provide the

best ink cartridge economy and maintain print

quality, we do not recommend unplugging the

machine frequently and/or leaving the machine

unplugged for extended periods of time. Each

time you plug the machine in, it automatically

cleans the print head, which uses some of your

ink.

We recommend using to power down the

machine. Using allows minimal power to

the machine, resulting in periodic, but less

frequent, cleaning of the print head.

NOTE

If you set the wrong language, you can change it

after setting the date and time. (uuAdvanced

User’s Guide: Changing the LCD language)

1 2 3 4 5 6 7 ... 29 30

Comments to this Manuals

No comments