Brother MFC-9465CDN User's Guide download pdf (Page 171)

Scanning

164

Note

User adjustable from 8.9 x 8.9 mm to 215.9 x 355.6 mm.

Adjusting the Image 9

 Brightness

Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average, and

is usually suitable for most images.

You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image.

You can also enter a value in the box to set the level.

If the scanned image is too light, set a lower Brightness level and scan the document again.

If the image is too dark, set a higher Brightness level and scan the document again.

Note

The Brightness setting is not available for 256 Colour.

 Contrast

You can increase or decrease the contrast level by moving the slider to the left or right. An increase

emphasizes dark and light areas of the image, while a decrease reveals more detail in grey areas. You

can also enter a value in the box to set the Contrast.

Note

The Contrast setting is only available if you have set Scan Type to Gray (Error Diffusion), True Grey

or 24bit Colour.

 Reduce Noise

You can improve and enhance the quality of your scanned images with this selection. The Reduce Noise

setting is available when using 24bit Colour and scan resolutions of 300 × 300 dpi, 400 × 400 dpi or 600

× 600 dpi.

When scanning photographs or other images for use in a word processor or other graphics application, try

different settings for the Resolution, Scan Type, Brightness and Contrast to see which setting best suits

your needs.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 257 258

No comments

Brother MFC-9465CDN User's Guide Page 171