Brother MFC-9465CDN User's Guide download pdf (Page 61)

Scanning

Reduce Noise 3

You can improve and enhance the quality of your scanned images with this selection. The Reduce Noise

setting is available when using 24bit Colour and scan resolutions of 300 × 300 dpi, 400 × 400 dpi or 600 ×

600 dpi.

Brightness 3

Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average.

You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image. You

can also enter a value in the box to set the level.

If the scanned image is too light, set a lower Brightness level and scan the document again. If the image is

too dark, set a higher Brightness level and scan the document again.

Note

The Brightness setting is not available when 256 Colour is chosen.

Contrast 3

You can increase or decrease the Contrast level by moving the slider to the left or right. An increase

emphasizes dark and light areas of the image, while a decrease reveals more detail in grey areas. You can

also enter a value in the box to set the Contrast.

Note

The Contrast setting is only available when Grey (Error Diffusion), True Grey or 24bit Colour is chosen.

When scanning photographs or other images for use in a word processor or other graphics application, try

different settings for the contrast and resolution to see which setting best suits your needs.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 257 258

No comments

Brother MFC-9465CDN User's Guide Page 61