Brother RJ-3150 User's Guide

RJ-3050RJ-3150Before using this printer, be sure to read this Online User’s Guide.We suggest you keep this manual in a safe place.Version 0UK ENGOnlin

Section IBasic Operations ISetting Up the Printer 2Using the Printer 39Printer Setting Tool 49Other Functions 90Printing Labels Using P-touch Template

Other Functions 914g To turn mass storage mode off, turn the printer off.The printer will start up in its normal operating mode.Important• When the pr

9255P-touch Template Function 5With a barcode reader connected to the printer, labels and barcodes can easily be printed by scanning barcodes. Basic o

Printing Labels Using P-touch Template (RJ-3150 Only) 935Preparation 5Before connecting the barcode reader to this printer, specify barcode reader set

Printing Labels Using P-touch Template (RJ-3150 Only) 945Connecting a Barcode Reader 5Connect a barcode reader to the printer. Barcode reader connect

Printing Labels Using P-touch Template (RJ-3150 Only) 955Preset Template Printing 5Note• For details on the barcodes that can be scanned for the vario

Printing Labels Using P-touch Template (RJ-3150 Only) 965e From the “Basic settings” barcodes, scan the barcode for the parameter whose setting is to

Printing Labels Using P-touch Template (RJ-3150 Only) 975Barcode Printing (Copying) 5A barcode scanned with the barcode reader can be printed with the

Printing Labels Using P-touch Template (RJ-3150 Only) 985Note• Settings can be specified for multiple parameters.• If no settings are specified, label

Printing Labels Using P-touch Template (RJ-3150 Only) 995Database-assisted Label Printing 5By linking objects in a label layout to a database, then sc

Printing Labels Using P-touch Template (RJ-3150 Only) 1005f From the “Basic settings” barcodes, scan the barcode for the parameter whose setting is to

211General Description 1Setting Up the Printer 1Front (RJ-3050) 1 Battery compartment2 Battery latch3 Mini-USB port4 DC connector5 Cover open lever6 R

Printing Labels Using P-touch Template (RJ-3150 Only) 1015k The object data in the specified template is replaced with the database data, and the labe

Printing Labels Using P-touch Template (RJ-3150 Only) 1025Numbering Function (Serialised Number) Printing 5Labels can be printed while automatically i

Printing Labels Using P-touch Template (RJ-3150 Only) 1035b Make sure that the printer is connected to the computer, and then transfer the label layou

Printing Labels Using P-touch Template (RJ-3150 Only) 10452 Refer to the example below, and scan the barcode for the number specified as the key numbe

Printing Labels Using P-touch Template (RJ-3150 Only) 1055For a Barcode Label 5 Operating proceduresCreate barcode label i Transfer label layout to p

Printing Labels Using P-touch Template (RJ-3150 Only) 1065Note• Up to 9 Numbering objects can be specified in a single template.• A maximum of 15 char

Printing Labels Using P-touch Template (RJ-3150 Only) 10752 Refer to the example below, and scan the barcode for the number specified as the key numbe

10866Maintenance of the printer may be carried out as required. However, some environments may require that maintenance must be done more frequently (

Maintaining the Printer 1096Roller Maintenance 6Use a piece of cellophane tape or a lint-free cloth to remove dirt from the roller. After cleaning the

Maintaining the Printer 1106Paper Outlet Maintenance 6If adhesive accumulates at the paper outlet and media becomes jammed (for RJ-3150) or if the pap

Setting Up the Printer 31Front (RJ-3150) 1 Battery compartment2 Battery latch3 USB host port4 Mini-USB port5 DC connector6 Cover open lever7 Peeler la

Maintaining the Printer 1116Label Peeler Maintenance (RJ-3150 Only) 6If adhesive accumulates at the label peeler and media becomes jammed, remove the

11277LED Indicators 7The indicators light and blink to indicate the printer’s status. The following symbols are used in this section to explain the me

Reference 1137RJ-3050 and RJ-3150 7 (Once every 3 seconds)Wireless on, not connectedWireless on, connected (Once every second)Now setting WPSBluetooth

Reference 1147Indicator Warnings 7Problem SolutionThe POWER indicator does not light The printer is receiving no power.Confirm that the rechargeable L

Reference 1157Printing the Printer Set-up Information 7You can use the (Feed) button to print a report that lists the following printer settings: Pr

11688Overview 8If you have any problems with the printer, first check to make sure that you have performed the following tasks correctly: Install the

Troubleshooting 1178A data transmission error appears on your computer. Is the correct port selected?Check that the correct port is selected. Is the

Troubleshooting 1188Printed barcodes cannot be read.  Print labels so that barcodes are aligned with the print head as shown below. 1 Print head2 Bar

Troubleshooting 1198When printing via the USB cable, the printer repeatedly pauses and then continues printing.Is the printer set for sequential print

Troubleshooting 1208Error messages from the printer (RJ-3150 only)Error Message Cause/RemedyIncorrect Password  Is the admin password correct?Enter t

Setting Up the Printer 41Using the Rechargeable Li-ion Battery 1Installing the Rechargeable Li-ion Battery 1a Make sure that the battery latch is lift

Troubleshooting 1218Unsupported USB Hub Remove HubIs the printer connected to a USB hub?RJ-3150 is not compatible with a USB hub. Turn off the printer

12299Product Specifications 9Technical Information 9Model Name RJ-3050 RJ-3150PrintingPrinting technology Direct ThermalPrint resolution 203 dpiPrint

Technical Information 1239Power supply (optional)Battery Rechargeable Li-ion battery: 7.2 VBattery yield 5,300 labels (when connected by USB, and usin

Section IISoftware IIHow to Use P-touch Editor 125How to Use P-touch Transfer Manager & P-touch Library135Transferring Label Templates with P-touc

1251010Using P-touch Editor 10You will need to install P-touch Editor and the printer driver to use your printer with your computer.To download the la

How to Use P-touch Editor 12610b Select an option in the screen. 1 To create a new layout, click the [New Layout] button.2 To create a new layout usin

How to Use P-touch Editor 12710Printing with P-touch Editor 10Express mode 10This mode allows you to quickly and easily create layouts that include te

How to Use P-touch Editor 12810Snap mode 10This mode allows you to capture all or a portion of your computer screen display, print it as an image, and

How to Use P-touch Editor 12910Tips for Creating Templates 10From the computer, use P-touch Editor 5.1, which can be downloaded from the Brother Solut

How to Use P-touch Editor 13010d Click [Text] (1), and then specify the font and style (2). e Clicking displays the cursor so text can be typed in.

Setting Up the Printer 51Recharging the Rechargeable Li-ion Battery 1While Installed in the Printer 1The rechargeable Li-ion battery can be charged wh

How to Use P-touch Editor 13110Setting the Text and Order for Displaying on the LCD Display 10Using P-touch Editor 5.1, the text displayed on the LCD

How to Use P-touch Editor 13210Inserting the Date and Time in a Label 10a In P-touch Editor 5.1, open the label layout to be edited.b On the menu bar,

How to Use P-touch Editor 13310Linking a Database to a Template 10 Label sample A database can be linked to the template that was created. Since the

How to Use P-touch Editor 13410d Click [Next] to display a settings dialog box. With [Database Field] under [Merge Fields], specify which database col

1351111P-touch Transfer Manager 11This program allows you to transfer templates and other data to the printer and save backups of your data on the com

How to Use P-touch Transfer Manager & P-touch Library 13611Using P-touch Transfer Manager 11In order to use P-touch Transfer Manager, the label te

How to Use P-touch Transfer Manager & P-touch Library 13711Main window 11 1 Menu barProvides access to various commands, which are grouped under e

How to Use P-touch Transfer Manager & P-touch Library 13811Explanations of the Toolbar IconsIcon Button name Function Transfer(Only for P-touch Tr

How to Use P-touch Transfer Manager & P-touch Library 13911Transferring Templates or Other Data from the Computer to the Printer via USB11Use the

How to Use P-touch Transfer Manager & P-touch Library 14011c Right-click the [Configurations] folder, select [New], and then create a new folder.

Setting Up the Printer 61Connecting to an AC Power Socket (Optional) 1Connect the printer to a nearby AC power socket to charge the rechargeable batte

How to Use P-touch Transfer Manager & P-touch Library 14111You can view the templates and other data by selecting the folder in the [Configuration

How to Use P-touch Transfer Manager & P-touch Library 14211e To change the key number assigned to an item, right-click the item, select [Key Assig

How to Use P-touch Transfer Manager & P-touch Library 14311g Select the folder containing the templates or other data that you want to transfer, a

How to Use P-touch Transfer Manager & P-touch Library 14411Backing up Templates or Other Data Saved in the Printer 11Use the following procedure t

How to Use P-touch Transfer Manager & P-touch Library 14511Deleting All the Printer Data 11Use the following procedure to delete all templates or

How to Use P-touch Transfer Manager & P-touch Library 14611Using P-touch Library 11Starting P-touch Library 11For Windows Vista® / Windows®7 / Win

How to Use P-touch Transfer Manager & P-touch Library 14711Opening and Editing Templates 11Select the template you want to open or edit, and then

How to Use P-touch Transfer Manager & P-touch Library 14811Printing Templates 11Select the template that you want to print and then click [Print].

How to Use P-touch Transfer Manager & P-touch Library 14911b Specify the search criteria.The following search criteria are available:c Click [Begi

1501212By using P-touch Transfer Express, label templates can easily be transferred to the Brother printer. After the label template has been created

Setting Up the Printer 71Connecting to a DC Power Socket (Optional) 1Connect the printer to your vehicle’s 12 V DC power socket (cigarette lighter, et

Transferring Label Templates with P-touch Transfer Express 15112Transferring the Label Template to P-Touch Transfer Manager12a Create the label layout

Transferring Label Templates with P-touch Transfer Express 15212Saving the Label Template as a Transfer Package File (.pdz) 12In order to create a fil

Transferring Label Templates with P-touch Transfer Express 15312c Click [File] - [Save Transfer File]. Note• If [Save Transfer File] was clicked while

Transferring Label Templates with P-touch Transfer Express 15412Distributing the Transfer Package File (.pdz) and P-Touch Transfer Express to the User

Transferring Label Templates with P-touch Transfer Express 15512Transferring the Transfer Package File (.pdz) to Brother Printer 12Using the P-touch T

Transferring Label Templates with P-touch Transfer Express 15612If there are either multiple or no Transfer Package files (.pdz) in the folder contain

Transferring Label Templates with P-touch Transfer Express 15712Click [Yes]. The transfer of the Transfer Package file begins. e Click [OK]. The trans

1581313The software can be upgraded to the latest available version using this tool.In the following steps, you will see XX-XXXX. Read "XX"

How to update P-touch Software 15913b Click the [Computer software update] icon. c Select the [Printer] and [Language], select the check box next to P

How to update P-touch Software 16013Updating the Firmware 13Important• Do not turn off the power when transferring data or updating firmware.• If anot

Setting Up the Printer 81Stopping Rechargeable Li-ion Battery Charging 1To stop rechargeable Li-ion battery from charging, disconnect the AC power cor

How to update P-touch Software 16113d Select the [Printer], ensure that [The machine is connected correctly.] is displayed, and then click [OK]. e Sel

Section IIIWireless network IIIIntroduction 163Changing Your Printer’s Network Settings 164Configuring Your Printer for a Wireless Network 167Web Base

1631414Network Features 14Your Brother printer can be shared on an IEEE 802.11b/g/n wireless network using the internal network print server. The prin

1641515Changing Your Printer's Network Settings (IP Address, Subnet Mask and Gateway) 15Using the BRAdmin Light Utility 15The BRAdmin Light utili

Changing Your Printer’s Network Settings 16515c Double-click the unconfigured device. NoteIf you don’t use a DHCP/BOOTP/RARP server, the device will a

Changing Your Printer’s Network Settings 16615Other Management Utilities 15Your Brother printer can be used with the following management utilities in

1671616Using Your Brother Printer’s Own Functions (RJ-3150 Only) 16You can establish a wireless LAN connection, and configure or display the network s

1681717Overview 17You can use a standard web browser to manage a printer on your network using HTTP. When using Web Based Management, the following ar

Web Based Management 16917Configuring the Printer Settings Using Web Based Management (Web Browser) 17A standard web browser can be used to change you

1701818Overview 18This chapter explains how to resolve typical network problems you may encounter when using the Brother printer. If, after reading th

Setting Up the Printer 91Installing the Clock Battery (RJ-3150 Only) 1a Open the battery cover using a Phillips screwdriver.b Insert the supplied batt

Troubleshooting 17118I cannot complete the Wi-Fi settings network setup configuration.Question SolutionAre you using security software?  Confirm your

Troubleshooting 17218Is your Brother printer correctly connected to the network?For RJ-3050, check the Wi-Fi indicator on the printer. : The network i

Troubleshooting 17318Is your Brother printer correctly connected to the network?For RJ-3050, check the Wi-Fi indicator on the printer. : The network i

Troubleshooting 17418Is your Brother printer correctly connected to the network?For RJ-3050, check the Wi-Fi indicator on the printer. : The network i

1751919Supported Protocols and Security Features 19Appendix A 19Interface Wireless IEEE 802.11b/g/n (Infrastructure Mode)IEEE 802.11b (Ad-hoc Mode)Net

1762020Types of Network Connections and Protocols 20You will find basic information about the advanced network features of the Brother printer, along

Appendix B 17720Network Shared printing 20In a Network Shared environment, each computer sends data via a centrally controlled computer. This type of

Appendix B 17820Configuring Your Brother Printer for a Network 20IP Addresses, Subnet Masks and Gateways 20To use the printer in a networked TCP/IP en

Appendix B 17920Subnet mask 20Subnet masks restrict network communication. For example, Computer 1 can talk to Computer 2• Computer 1IP Address: 192.

Appendix B 18020Wireless Network Terms and Concepts 20Security Terms 20Authentication and encryption 20Most wireless networks use some kind of securit

Setting Up the Printer 101Turning the Printer On or Off 1NoteWhen turning the printer off, do NOT remove the battery until the STATUS indicator goes o

Appendix B 18120 TKIPTKIP (Temporal Key Integrity Protocol) provides per-packet key mixing, a message integrity check and rekeying mechanism. AESAdv

Appendix B 18220Authentication and Encryption methods for an enterprise wireless network 20An enterprise wireless network is a large network with IEEE

Appendix B 18320Encryption methods 20 TKIPTKIP (Temporal Key Integrity Protocol) provides a per-packet key mixing a message integrity check and rekey

Appendix B 18420User ID and password 20The following security methods support a user ID less than 64 characters and a password less than 32 characters

1852121General Procedure for the P-touch Template Function 21The general procedure for using the P-touch Template function is described below.For deta

Appendix C 18621List of Barcodes for Specifying Settings 21These are the barcodes for specifying settings used with the Printing Labels Using P-touch

Appendix C 18721For entering numbers121Preset template number 211 21 2 213 21 4 215 21 6 217 21 8 219 21 0 2100 21Preset template 1 21 Pre

Appendix C 188211These are used when specifying the number of copies printed and when selecting a template number.Scan barcodes to specify a three-dig

iIntroductionImportant Notice The contents of this document and the specifications of this product are subject to change without notice. Brother res

Setting Up the Printer 111When Using RJ-3050 or When Not Using the Label Peeler (RJ-3150) 1a Push the cover open lever to open the RD Roll compartment

Setting Up the Printer 121c While lifting up the roll guide adjustment lever (1), push in both roll guides (2) to the roll width.Make sure that the RD

Setting Up the Printer 131Cutting Roll Paper 1Roll paper can be cut using the printer's tear bar. Pull one edge of the ejected paper up and towar

Setting Up the Printer 141a Push the cover open lever to open the RD Roll compartment cover. 1 Cover open leverb Push both sides of the label peeler t

Setting Up the Printer 151c Peel off the first label of the RD Roll. Then, insert the RD Roll so that the top edge of the second label is at the same

Setting Up the Printer 161Important• Before using the label peeler, specify the following settings:• Device settings of the “Printer Setting Tool”: Sp

Setting Up the Printer 171After Printing 1Printed labels can be automatically peeled off their backing paper before they are fed out of the media exit

Setting Up the Printer 181Removing the RD Roll 1a Push the cover open lever, and then open the RD Roll compartment cover. NoteWhen you use the label p

Setting Up the Printer 191b While pushing the roll release lever, tilt the roll guide slightly, and then remove the roll. The roll can be removed with

Setting Up the Printer 201Attaching the Belt Clip 1When using the printer outside the office, you can attach the included belt clip to the printer and

iiTrademarks and CopyrightsBROTHER is either a trademark or a registered trademark of Brother Industries, Ltd.Microsoft, Windows Vista, Windows Server

Setting Up the Printer 211Installing the Printer Driver and the Software 1To print from your computer, you must install P-touch Editor, the printer dr

Setting Up the Printer 221Uninstalling the Printer Driver 1Read "RJ-XXXX" in the following steps as your model name.Windows Vista® / Windows

Setting Up the Printer 231Windows® 8 / Windows® 8.1 / Windows Server® 2012 / Windows Server® 2012 R2 1a Press and hold the (Power) button to turn off

Setting Up the Printer 241Connecting the Computer and Printer 1The printer can be connected to your computer using a USB cable or a Bluetooth or Wi-Fi

Setting Up the Printer 251Bluetooth Connection 1NoteFollow the recommendations of the manufacturer of your Bluetooth-equipped devices (computers and m

Setting Up the Printer 261Wi-Fi Connection 1ImportantIn order for the printer and your network access point or router to communicate, you must first i

Setting Up the Printer 271LCD Display (RJ-3150 Only) 1Screen 1When the printer is turned on, the main screen appears.Normal mode1 Template mode 1 1 Se

Setting Up the Printer 28110 USB iconThe USB icon is displayed when the printer is connected to an enabled USB host device.11 Printer status12 Templat

Setting Up the Printer 291With the buttons on the printer, the following settings can be specified:Menu Title Sub title Settings DescriptionSettings P

Setting Up the Printer 301Settings (Continued)Template SettingsTemplate Mode On Select whether the template mode starts when the printer is turned on.

iiiIMPORTANT NOTE Please go to the Brother Solutions Center at http://support.brother.com/ and click [Manuals] on your model page to download the oth

Setting Up the Printer 311Settings (Continued)Auto Power Off Off Specify the amount of time that passes before the printer turns off automatically.123

Setting Up the Printer 321Media Active Media ****** (Media name)TypeLeft MarginWidthTop MarginLengthBottom MarginDisplay the information for the curre

Setting Up the Printer 331Information HELP Using Peeler Display explanations regarding how to use the printer.Release PeelerInserting RollRemoving Rol

Setting Up the Printer 341Display Display Brightness-2 Select the brightness of the LCD display.-10+1+2Backlight TimeoutOff Specify the amount of time

Setting Up the Printer 351Administration (The default password is "1111".)Command Mode P-touch Template 2.0Select the type of command mode.E

Setting Up the Printer 361Administration (The default password is "1111".)(Continued)Reset Back Select [Back] to return to the previous scre

Setting Up the Printer 371Note• Some settings may differ depending on the firmware (printer software).• If you want to reset the settings, use [Device

Setting Up the Printer 381d Use [ ] or [ ] to specify two digits each for the hour and minutes, and then select [AM], [PM] or [24].e Press the [OK] bu

3922Operation Panel 2The operation panel consists of the following buttons and indicators.Using the Printer 2RJ-3050 1 (Power) button2 (Feed) button3

Using the Printer 402Button Functions 2(Power) button functionOperationTurn the printer onWhile the printer is turned off, press and hold the (Power)

ivTable of ContentsSection I Basic Operations1 Setting Up the Printer 2General Description ...

Using the Printer 412(Bluetooth) button function (RJ-3050 only)OperationUse Bluetooth to communicate when printingWhen this button is pressed while th

Using the Printer 422Indicators 2RJ-3050 2 RJ-3150 2 The indicators light and blink to indicate the printer’s status. Each indicator may light or blin

Using the Printer 432Printing Solutions 2Your printer can be used with several versions of the Windows® operating systems.In most situations, the prin

Using the Printer 442g Click [Print] in the computer program’s menu.For RJ-3050, the POWER indicator blinks in green to indicate that the printer is r

Using the Printer 452Printer Driver Options 2You can configure various settings in the printer driver screen, such as paper size, number of copies, et

Using the Printer 462c If a database is linked:A screen for selecting the database number [Record#] appears. Press [ ] or [ ] to select the number of

Using the Printer 472Printing Using a Barcode Reader 2Using P-touch Template functions, you can scan barcodes to display a template transferred to the

Using the Printer 482Label Layouts on the Printer (Deleting and Log) (RJ-3150 Only)2With the following procedures, label layouts on the printer can be

4933About the Printer Setting Tool 3By using the “Printer Setting Tool”, the printer’s communication settings, device settings, P-touch Template setti

Printer Setting Tool 503Using the Printer Setting Tool 3a Connect the printer to be configured to the computer.b For Windows Vista® / Windows®7 / Wind

vPrinting Labels Stored in the Printer (RJ-3150 Only)...45Configuring the

Printer Setting Tool 5135 Paper Size SetupAdd media information and settings to the printer driver in order to use a size not listed in the [Paper Siz

Printer Setting Tool 523Communication Settings 3With [Communication settings] in the “Printer Setting Tool”, the printer communication information can

Printer Setting Tool 5335 Node NameDisplays the node name. The node name can also be changed. (See 7 Change Node Name/Bluetooth Device Name in Menu Ba

Printer Setting Tool 543Menu Bar 3 1 Apply Settings to the PrinterApplies the settings to the printer.2 Save Settings in Command FileSaves the specifi

Printer Setting Tool 5533 Import Import from the current computer wireless settingsImports the settings from the computer.Note• When importing the co

Printer Setting Tool 5636 Automatically detects the connected printer, and retrieves the current settingsIf this check box is selected and a printer i

Printer Setting Tool 573General Tab 3Communication Settings 3 1 Network Settings on Power OnDetermines the conditions for connecting via Wi-Fi when th

Printer Setting Tool 583IPv6 3 1 IPv6 usageSelect [Enable] or [Disable].2 Priority on IPv6 addressSelect to give priority to an IPv6 addresses.12

Printer Setting Tool 593Wireless LAN Tab 3TCP/IP (Wireless) 3 1 Boot MethodSelect [AUTO], [BOOTP], [DHCP], [RARP] or [STATIC].2 IP Address/Subnet Mask

Printer Setting Tool 603IPv6 3 1 Static IPv6 AddressSpecify the value.2 Enable this addressSelect to make the specified static IPv6 address effective.

vi6 Maintaining the Printer 108Print Head Maintenance ...

Printer Setting Tool 613Wireless Settings 3 1 Communication ModeSelect [Infrastructure] or [Ad-hoc].2 SSID (Network Name)Click the [Search] button to

Printer Setting Tool 623Communication Modes and Authentication Methods/Encryption Modes 3 When [Communication Mode] is set to [Ad-hoc] When [Communi

Printer Setting Tool 633Wireless Direct Tab 3Wireless Direct Settings 3 1 SSID/Network Key GenerationSelect [AUTO] or [STATIC]. 2 SSID (Network Name)/

Printer Setting Tool 643Bluetooth Tab 3 1 Visible to Other DevicesSelect whether the printer can be “discovered” by other Bluetooth devices.Available

Printer Setting Tool 653Applying Setting Changes to Multiple Printers 3a After applying settings to the first printer, disconnect the printer from the

Printer Setting Tool 663Device Settings 3With [Device settings] in the “Printer Setting Tool”, default printer settings as well as settings for the LC

Printer Setting Tool 6734 Current SettingsClick this button to retrieve the settings from the currently connected printer and display them in the dial

Printer Setting Tool 683Menu Bar 3 1 Apply Settings to the PrinterApplies the settings to the printer.Performs the same operation as when the [Apply]

Printer Setting Tool 6936 Save Print Log in FileSaves the print log in a file in the CSV format.The following information is included in the print log

Printer Setting Tool 703Settings Tabs 3Basic Tab 3 1 Disable these settingsWhen this check box is selected, appears in the tab, and the settings can

vii13 How to update P-touch Software 158Updating P-touch Editor...

Printer Setting Tool 7136 Print SpeedSelect the printer’s printing speed.Available settings: [2 ips / 50.8 mm/s], [3 ips / 76.2 mm/s], [4 ips / 101.6

Printer Setting Tool 723Advanced Tab 3 1 Disable these settingsWhen this check box is selected, appears in the tab, and the settings can no longer b

Printer Setting Tool 7337 Print Data after PrintingSelect whether or not print data is erased automatically after it is printed.Available settings: [E

Printer Setting Tool 7433 Media Sensor (Reflective/Bar)The following reflective/black mark sensor parameters can be adjusted.[Mark Detection Sensitivi

Printer Setting Tool 7533 LanguageSelect the language of the LCD display.Available settings: [English], [Español], [Français], [Português], [Deutsch],

Printer Setting Tool 76310 Lock SettingsSelect the check boxes for the settings that you do not want to be changed using the LCD display of the printe

Printer Setting Tool 7734 Date FormatSelect the date format for the clock.5 Time FormatSelect the time format for the clock.6 Start Up in Template Mod

Printer Setting Tool 783Store Image (RJ-3150 Only) 3Register images to the printer and add titles to the images.In addition, the data registered to th

Printer Setting Tool 7936 Send to PrinterRegisters the images and titles, which are registered in the transfer image list, to the printer selected in

Printer Setting Tool 8034OKSaves edited titles or accepts an image chosen with the browse function, and returns to the transfer image list of the main

viii21 Appendix C 185General Procedure for the P-touch Template Function ...185L

Printer Setting Tool 813P-touch Template Settings 3P-touch Template mode provides functions for inserting data from a device, such as a barcode reader

Printer Setting Tool 823P-touch Template Settings Dialog Box 3 1 Default Command ModeIn order to use P-touch Templates, select the [P-touch Template]

Printer Setting Tool 8336 International Character SetSelect one of the following countries for the character set.Available settings: [United States],

Printer Setting Tool 843Paper Size Setup 3With [Paper Size Setup] in the “Printer Setting Tool”, paper sizes not available in the [Paper Size] list of

Printer Setting Tool 8534DeleteDeletes the selected paper format. A deleted paper format cannot be restored.5 ImportReads the text file containing the

Printer Setting Tool 863New Dialog Box 3 1 Paper Size NameType in the name of the paper format to be added.2 Paper TypesSelect the paper type.Availabl

Printer Setting Tool 873Advanced Printing Adjustments Dialog Box 3 1 Printing Reference Point AdjustmentAdjust the position of the reference point (po

Printer Setting Tool 8834 Media Sensor (Transmissive/Gap)Adjust the precision with which the transmissive/gap sensor detects the gaps (spacing) for di

Printer Setting Tool 893Distributing Paper Formats 3The paper formats exported from the [Currently Registered Paper Sizes] list can be distributed to

9044Mass Storage 4Description 4The mass storage feature allows you to execute commands and perform JPEG printing by sending data from a computer or ot