Brother DCP-750CW User Manual download pdf (Page 28)

Installing the Driver & Software

STEP2

Windows

Wireless

Network

5 The machine will search for available SSIDs. If

a list of SSIDs is displayed, use the a or b

keys to choose the SSID you wrote down in

step 1, then press OK. Go to step 9.

Note

It will take a few seconds to display a list of

available SSIDs.

If your access point is set to not broadcast the

SSID you will have to manually add the SSID

name. Go to step 6.

6 Select <NEW SSID> using a or b and press

OK. Go to step 7.

7 Enter the SSID you wrote down in step 1 using

a, b and OK keys to choose each letter or

number. You can use the and keys to

move the cursor left and right. For example, to

enter the letter a, press the a key once. To

enter the number 3, hold down the a key until

it appears.

The letters appear in this order: lower case,

upper case, numbers and then special letters.

(For more information, see Entering Text on

page 46.)

Press OK when you have entered all the

characters, then press Yes to apply your

settings.

8 Press a or b to choose Infrastructure,

then press OK.

9 Use the a, b and OK keys to choose one of

the options below: If your network is configured

for Authentication and Encryption you must

match the settings used for your network.

No Authentication or Encryption: Choose

Open System, press OK then choose None

for Encryption Type and press OK. Then

press to choose Yes to apply your settings.

Go to step 12.

No Authentication with WEP Encryption:

Choose Open System, press OK then use the

a or b to choose WEP for the

Encryption Type and press OK. Go to

step 10.

Authentication with WEP Encryption:

Choose Shared Key, press OK. Go to

step 10.

Authentication with WPA/WPA2-PSK (TKIP

or AES) Encryption: Choose WPA/WPA2-

PSK, press OK. Go to step 11.

10 Choose the appropriate key number and press

OK. Enter the WEP key you wrote down in

step 1 using a, b and OK keys to choose

each letter or number. You can use the

and keys to move the cursor left and right.

For example, to enter the letter a, press the a

key once. To enter the number 3, hold down

the a key until it appears.

The letters appear in this order: lower case,

upper case, numbers and then special letters.

(For more information, see Entering Text on

page 46.)

Press OK when you have entered all the

characters, then press Yes to apply your

settings. Go to step 12.

Most access points and routers can store

more than one key, but they will only use

one at any time for authentication and

encryption.

11 Press a or b to choose TKIP or AES for

Encryption Type and press OK.

Enter the WPA/WPA2-PSK password you

wrote down in step 1 using a, b and OK keys

to choose each letter or number. You can use

the and keys to move the cursor left

and right. For example, to enter the letter a,

press the a key once. To enter the number 3,

hold down the a key until it appears.

The letters appear in this order: lower case,

upper case, numbers and then special letters.

(For more information, see Entering Text on

page 46.)

Press OK when you have entered all the

characters, then press Yes to apply your

settings. Go to step 12.

12 Your machine will now try to connect to your

wireless network using the information you

have entered. If successful, Connected will

appear briefly on the LCD.

If your machine does not successfully connect

to your network, you should repeat steps 4 to

11 to make sure you have entered the correct

information.

If your access point does not have DHCP

enabled you will need to manually configure

the IP address, subnet mask and gateway of

the machine to suit your network. See the

Network User’s Guide for details.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 50 51

Comments to this Manuals

No comments

Brother DCP-750CW User Manual Page 28

Comments to this Manuals

Related products and manuals for Printers Brother DCP-750CW