Brother DCP 8060 User Manual

Before you can use the machine, you must set up the hardware and install the software.Please read this “Quick Setup Guide” for the correct setup proce

8Installing the Drivers & SoftwareThe CD-ROM includes the following items:Install MFL-Pro SuiteYou can install the MFL-Pro Suite and multifunction

9Setting Upthe machineWindows®USBWindows®ParallelWindowsNT® 4.0ParallelMacintosh®USBMacintosh®NetworkWindows®NetworkNetwork AdministratorsInstalling t

10Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 7.1Turn off and unplug the machine from the AC o

118When this screen appears, connect the USB interface cable to your PC, and then connect it to the machine.(For Windows® XP)(For Windows® 98/98SE/Me/

12Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 7.1Turn off and unplug the machine from the AC o

138When this screen appears, connect the parallel interface cable to your PC, and then connect it to the machine.(For Windows® XP)(For Windows® 98/98S

14CAfter the computer restarts, the installation of the Brother drivers will automatically start. Follow the instructions on the screen.(For Windows®

15Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 7.1Turn off and unplug the machine from the AC o

168When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the Software License Agreement.9Choose Standard

17Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 7.1Turn off and unplug the machine from AC outle

Warning Caution Improper Setup Note User’s GuideWarnings tell you what to do to prevent possible personal injury. Cautions specify procedures you must

189Choose Network Connection and then click Next.0The installation of the Brother drivers will automatically start. The installation screens appear on

19. After restarting the computer, the Installation Diagnostics will run automatically. If the installation is unsuccessful, the installation results

20Installing the Drivers & SoftwareMake sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 7.1Turn off

210Click the Brother Laser icon.On the right side of the Chooser, choose the machine to which you want to print.Close the Chooser.The printer and scan

22Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 7.1Turn off and unplug the machine from the AC o

23DO NOT connect the machine to a USB port on a keyboard or a non-powered USB hub.8Plug in the power cord and turn on the machine.9Choose USB and then

24DChoose USB.EChoose your model name, and then click Add.For Mac OS® X 10.3 users:For Mac OS® X 10.4 or greater users:FClick Printer Setup Utility, t

25Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 7.1Turn off and unplug the machine from the AC o

260Click the Brother Laser (IP) icon, and then choose BRN_XXXXXX. Close the Chooser.The Printer driver has been installed.ATo install Presto!® PageMan

27Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 7.1Turn off and unplug the machine from the AC o

1Carton components may differ from one country to another.Save all packing materials and the carton.Carton ComponentsQuick Setup GuideCD-ROMsFor Windo

289Choose Network and then click OK.0If you want to use the Scan key on the machine, you must check Register your computer with the "Scan To"

29FClick Add.For Mac OS® X 10.2.4 to 10.3.x users ➝ Go to G For Mac OS® X 10.4 users ➝ Go to H GMake the selection shown below.HChoose your model name

30 For Network Users and Administrators (DCP-8065DN only)The BRAdmin Professional utility for Windows® is designed to manage your Brother network conn

31Setting your IP Address, Subnet Mask and Gateway using BRAdmin Professional1Start BRAdmin Professional, and select TCP/IP.2Click Devices, then Searc

32The Brother BRAdmin Light software is a Java™ application that is designed for the Apple Mac OS® X environment. It supports some of the features of

33 Options and ConsumablesThe machine has the following optional accessories. You can expand the capabilities of the machine by adding these items.Whe

TrademarksThe Brother logo is a registered trademark of Brother Industries, Ltd.Brother is a registered trademark of Brother Industries, Ltd.Multi-Fun

US/CAN

2DCP-8060DCP-8065DNControl Panel1 Status LED 2 LCD (Liquid Crystal Display) 3 Menu keys4 Dial Pad 5 Stop/Exit key 6 Start key7 Copy keys 8 Scan key 9

3Table of ContentsSetting Up the machine1. Install the Drum Unit and Toner Cartridge Assembly ... 42. Load Paper in t

4Setting Up the machineDo NOT connect the interface cable. Connection the interface cable is done during the software installation process.1Open the f

5Setting Upthe machineWindows®USBWindows®ParallelWindowsNT® 4.0ParallelMacintosh®USBMacintosh®NetworkWindows®NetworkNetwork Administrators1Pull the pa

61Push the lever (1) in the direction shown to unlock the scanner.(The gray scanner lock lever is located at the back left side, under the document co

7Setting Upthe machineWindows®USBWindows®ParallelWindowsNT® 4.0ParallelMacintosh®USBMacintosh®NetworkWindows®NetworkNetwork Administrators1Press Menu.