Brother HL 2270DW User Manual download pdf (Page 16)

Configuring your machine for a wireless network (For HL-2135W, HL-2270DW and HL-2275DW)

Confirm your wireless network setup method 3

There are three methods to configure your wireless network machine. Use the Brother installer application

on the CD-ROM (recommended), the one-push wireless setting mode or the PIN Method of

Wi-Fi Protected Setup. The setup process will be different depending on your network environment.

Configuration using the Brother installer application on the CD-ROM to

configure your machine for a wireless network 3

We recommend that you use the Brother installer application on the CD-ROM we have provided with the

machine. By using this application, you can easily connect your machine to your wireless network and install

the network software and printer driver which you need to complete the configuration of your machine for a

wireless network. You will be guided by the on-screen instructions until you are able to use your Brother

wireless network machine. You must know your wireless network settings before you proceed with this

installation.

Configuration using the Automatic Wireless mode (Recommended) 3

If your WLAN access point/router (A) supports either Wi-Fi Protected Setup (PBC

) or AOSS™, you can

configure the machine easily without knowing your wireless network settings using the Brother installer

application.

Push Button Configuration

Configuration temporarily using a USB or network cable 3

You can temporarily use a USB cable or network cable to configure your Brother machine using this method.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 46 47

No comments

Brother HL 2270DW User Manual Page 16