Brother HL 2700CN User Manual Page 101

  • Download
  • Add to my manuals
  • Print
  • Page
    / 162
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 100
4 - 13 OPTIONS
SO-DIMM
We recommend that you expand the printer memory to avoid any MEMORY FULL errors.
The HL-2700CN printer has 64 MB of standard memory and a slot for optional additional memory. The
memory can be expanded up to a total of 576 MB by installing a commercially available SO-DIMM (Dual
In-line Memory Module).
The printer uses memory modules that are:
144 pins, no-parity, SDRAM with 64 MB or more.
The printer is not compatible with Extended Data Output (EDO) DIMM.
The following SO-DIMM sizes can be installed:
In general, SO-DIMM must have the following specifications:
<US>
64 MB
128 MB
256 MB
<Europe>
64 MB
128 MB
256 MB
512 MB
TechWorks
TechWorks
TechWorks
Buffalo Technology
Buffalo Technology
Buffalo Technology
Buffalo Technology
12345-0001
12462-0001
12469-0001
VN133-64M
VN133-128M
VN133-256M
VN133-512M
For more information, visit Techworks web site at www.techworks.com
Type:
CAS latency:
Clock frequency:
Capacity:
DRAM type:
144 pin and 64 bit output
2 or 3
100 MHz or more
64 MB to 512 MB
SDRAM
The printer’s standard memory can vary depending on the printer model and the country.
There might be some SO-DIMMs that will not work with this printer.
For more information, call the dealer you bought the printer from or Brother Customer Service.
For the latest information, visit the Brother Solutions Center at http://solutions.brother.com
Page view 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 161 162

Comments to this Manuals

No comments