Brother NC-9100H User Manual

Multi-Protocol Print/Fax Server Network User’s GuideNC-9100hMFC-8440 MFC-8640D MFC-8840DMFC-8840DN DCP-8040 DCP-8045DPlease read this manual thoroughl

ixHow to Select the Print Server (AppleTalk/EtherTalk)... 7-8How to Select the Print Server (TCP/IP)

FRONT PANEL SETUP MENU 10 - 11Repeating letters:If you need to enter a character assigned to the same key as the previous character, press move the

10 - 12 FRONT PANEL SETUP MENUPOP3 Server addressThis field displays the Host Name or IP address of the POP3 server (incoming E-mail server) used by t

FRONT PANEL SETUP MENU 10 - 13Setup Mail RX (For MFC only)This menu has Five selections Auto Polling, Poll Frequency, Header, Del Error Mail and Notif

10 - 14 FRONT PANEL SETUP MENU3Press Set.4Press Stop/Exit.Del Error MailWhen set to On, the MFC automatically deletes error mails that the MFC can not

FRONT PANEL SETUP MENU 10 - 15Setup Mail TX (For MFC only)This menu has three selections Sender Subject, Size Limit and Notification.Sender SubjectThi

10 - 16 FRONT PANEL SETUP MENUNotificationNotification feature when switched to On sends two fields of data in addition to the image data which reques

FRONT PANEL SETUP MENU 10 - 17Setup Relay (For MFC only)This menu has three selections RLY Broadcast, Relay Domain and Relay Report. For more informat

10 - 18 FRONT PANEL SETUP MENURelay ReportRelay Broadcast Report can be printed at the MFC used as the Relay Station for all Relay Broadcasts. Also, w

FRONT PANEL SETUP MENU 10 - 19Setup Misc.NetwareYou can select to switch the NetWare feature “On”, this allows you specify the Frame Type is item 2.1(

10 - 20 FRONT PANEL SETUP MENU2Press or to select On or Off.3Press Set.4Press Stop/Exit.DLC/LLC1(For MFC) Press Menu, 6, 6, 4.(For DCP) Press Menu

x Poll Frequency...10-13Header...10-13

FRONT PANEL SETUP MENU 10 - 211(For MFC) Press Menu, 6, 6, 6.(For DCP) Press Menu, 4, 2, 6.2Press or to select Auto/100B-FD/100B-HD/10B-FD/10B-HD.

10 - 22 FRONT PANEL SETUP MENUUser Setting List (For MFC only)This feature prints a report listing all the current user settings. The NC-9100h Print /

TCP/IP CONFIGURATION 11 - 11111TCP/IP ConfigurationAssigning TCP/IP InformationOverviewThe TCP/IP protocol requires that each device on the network ha

11 - 2 TCP/IP CONFIGURATIONUsing the machine control panel to allocate an IP address (Models with LCD panels only)For details on how to configure IP a

TCP/IP CONFIGURATION 11 - 3The BRAdmin Professional utility can use the IPX/SPX or TCP/IP protocols to communicate with the Brother Print/Fax server.I

11 - 4 TCP/IP CONFIGURATION5In the IP Config box, click the Static radio button. 6Click OK.Restart the print server by using BRAdmin Professional util

TCP/IP CONFIGURATION 11 - 5Using DHCP to Configure the IP addressThe Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms

11 - 6 TCP/IP CONFIGURATIONUsing ARP to Configure the Print/FaxServer IP AddressIf you are unable to use the BRAdmin Professional utility or the FAX\M

TCP/IP CONFIGURATION 11 - 7Unix/Linux SystemsTypically, Unix systems require the colon “:” character between each digit of the Ethernet address.arp -s

11 - 8 TCP/IP CONFIGURATIONUsing RARP to Configure the IP Address The Brother Print/Fax server’s IP address can be configured using the Reverse ARP (r

xi12Internet FAX (MFC Only) ...12-1Overview...

TCP/IP CONFIGURATION 11 - 9Using BOOTP to Configure the IP AddressBOOTP is an alternative to rarp that has the advantage of allowing configuration of

11 - 10 TCP/IP CONFIGURATIONCertain BOOTP host software implementations will not respond to BOOTP requests if you have not included a download filenam

INTERNET FAX (MFC ONLY) 12 - 11212Internet FAX (MFC Only)OverviewInternet Faxing (I-FAX) allows you to send and receive FAX documents using the Intern

12 - 2 INTERNET FAX (MFC ONLY)Getting ConnectedBefore sending or receiving an Internet Fax you must configure your Brother MFC to communicate with you

INTERNET FAX (MFC ONLY) 12 - 3Sending an Internet FaxSending an Internet Fax is the same as sending a normal Fax. If you have already programmed the a

12 - 4 INTERNET FAX (MFC ONLY)By pressing the appropriate number key the correct number of times, you can access the character you want. If you want t

INTERNET FAX (MFC ONLY) 12 - 5If you specify more than 16 characters, the LCD panel will scroll the name to the left character by character. You can e

12 - 6 INTERNET FAX (MFC ONLY)If your machine is out of paper when receiving data, the received data will be held in the MFC's memory. This data

INTERNET FAX (MFC ONLY) 12 - 7This can be done using the Web Management Utility or through the front panel. The steps for configuring Fax Forward can

12 - 8 INTERNET FAX (MFC ONLY)Your MFC has an E-mail address of [email protected], you wish to send a document from this machine to another MFC in Engla

xii 14Brother Internet Fax Printing Software...14-1Overview...

INTERNET FAX (MFC ONLY) 12 - 9Relay Broadcast from a PCYou can also send E-mail from your PC and have it relayed to a conventional FAX machine. The me

12 - 10 INTERNET FAX (MFC ONLY)To use this feature you must set the Notification option within the Setup Mail RX and Setup Mail TX options.Setup Mail

INTERNET FAX (MFC ONLY) 12 - 11Error mailIf there is a mail delivery error while sending an Internet Fax, the mail server will send an error message b

13 - 1 TROUBLESHOOTING1313TroubleshootingOverviewThis chapter describes procedures for troubleshooting problems you may encounter with a Brother Print

TROUBLESHOOTING 13 - 22If the configuration page prints but you cannot print documents, try the following aIf you are using TCP/IP:Try pinging the Pri

13 - 3 TROUBLESHOOTING3If you cannot make any of the connections in step 2, check the following:aMake sure the machine is powered on and on-line.bChec

TROUBLESHOOTING 13 - 46If the job exits the queue but does not print, make sure that you are not trying to print a text job to a PostScript printer. I

13 - 5 TROUBLESHOOTINGTCP/IP TroubleshootingIf you are using TCP/IP and cannot print to the Print/Fax server and you have checked the hardware and net

TROUBLESHOOTING 13 - 62If you are using a Linux operating system, the X-Window Print tool program that is included with Linux may not properly configu

13 - 7 TROUBLESHOOTING9If you are using Sun Solaris V2.4 or earlier, there is a bug which causes long print jobs to fail when using a Printer/Fax serv

UNIX PRINTING 1 - 111Unix PrintingPrinting from Unix/Linux Using TCP/IPOverviewBrother Print/Fax servers are supplied with the Transmission Control Pr

TROUBLESHOOTING 13 - 8Windows® 95/98/Me Peer-to-Peer (HP JetAdmin compatible method) TroubleshootingIf you are having trouble printing on a Windows® 9

13 - 9 TROUBLESHOOTINGBrother Internet Print (TCP/IP) Troubleshooting1The first step in troubleshooting is to make sure that you have a valid E-mail c

TROUBLESHOOTING 13 - 10“Get More Info” option in Windows® 2000 not working“Go to Printer’s Web site” in Windows® XP not workingIf you are using a URL

13 - 11 TROUBLESHOOTING1If you changed the login password, you must change the password in both the Brother Print/Fax server (using the SET NETWARE PA

TROUBLESHOOTING 13 - 122Make sure that the AppleTalk protocol of the Print/Fax server is enabled.3If you have a large network, make sure that you have

13 - 13 TROUBLESHOOTINGInternet Fax Troubleshooting1If there is a mail delivery error while sending an Internet Fax, the mail server will send an erro

TROUBLESHOOTING 13 - 149The Relay Broadcasting and Broadcasting features cannot be used at the same time.10Relay Broadcast can support the relay of a

14 - 1 BROTHER INTERNET FAX PRINTING SOFTWARE1414Brother Internet Fax Printing SoftwareOverviewDepending on your network configuration and application

BROTHER INTERNET FAX PRINTING SOFTWARE 14 - 2Installing Brother Internet Fax Printing DriverInsert the CDROM supplied with your Brother machine into y

14 - 3 BROTHER INTERNET FAX PRINTING SOFTWAREDuring the installation you are presented with the following screen, select the default unless you have p

1 - 2 UNIX PRINTING5When configuring the PRINTCAP file, pay particular attention to the service names, BINARY_P1 and TEXT_P1.TCP/IPBrother Print/Fax s

BROTHER INTERNET FAX PRINTING SOFTWARE 14 - 4Changing the BFP Port SettingsIf you have more than one networked machine with an NC-9100h Print/Fax Serv

14 - 5 BROTHER INTERNET FAX PRINTING SOFTWAREThe following screen shows the current configuration to alter this configuration, press the Configure Por

BROTHER INTERNET FAX PRINTING SOFTWARE 14 - 6If you do not know the password contact you Network Administrator.Then browse to Internet Settings and Re

14 - 7 BROTHER INTERNET FAX PRINTING SOFTWAREUninstalling from Windows® 95/98/Me/2000/XP and Windows NT® 4.0Select Start / Settings / Control Panel an

BROTHER INTERNET FAX PRINTING SOFTWARE 14 - 8Using the BFP Address BookThis utility can administer the Fax addresses, Internet Fax addresses and E-mai

14 - 9 BROTHER INTERNET FAX PRINTING SOFTWARE2In the Brother Address Book Member Setup dialog box, type the member's information.Name and Fax are

BROTHER INTERNET FAX PRINTING SOFTWARE 14 - 102Type the name of the new group in the Group Name field.3In the Available Names box, select each member

14 - 11 BROTHER INTERNET FAX PRINTING SOFTWARE3If you are exporting to an ASCII file, select Divide Character - Tab or Comma. This selection inserts a

BROTHER INTERNET FAX PRINTING SOFTWARE 14 - 12Clicking OK with start the BFP dialogue box as illustrated below. From this dialogue box you can either

APPENDIX A - 1AAAppendixAppendix AGeneral InformationYou can change the configuration of your Print/Fax server using any of the following methods.• Br

UNIX PRINTING 1 - 3The actual format of the entry may vary depending on your system, check your system documentation and also note the format of other

APPENDIX A - 2HTTP (Recommended)Use your favorite web browser to connect to the Brother Print/Fax server. This will allow you to configure machine and

A - 3 APPENDIXAppendix BUsing ServicesGeneralA service is a resource that can be accessed by computers that wish to print to the Brother Print/Fax ser

APPENDIX A - 4Appendix CReloading the Print / FAX Server FirmwareGeneralThe firmware on the Print/Fax server is stored in flash memory. This means tha

A - 5 APPENDIXReloading firmware using BRAdmin Professional utilityThe BRAdmin Professional utility can be used to easily re-program your Brother Prin

APPENDIX A - 65Netware GET from a serverYou must have a Netware server on your network (running IPX/SPX) and you must store the new firmware file in t

A - 7 APPENDIXftp> quitWhen you see 226 Data Transfer OK/Entering FirmWareUpdate mode, you can be sure that the firmware file is being transferred

APPENDIX A - 8Appendix DUpdating other MFC’s through the NetworkIt is possible to program Brother MFC’s on the network with either settings from an al

A - 9 APPENDIXWhen you select this option BRAdmin reads the telephone settings from that machine (if there are any programmed) into Brother PC-FAX Add

APPENDIX A - 10Highlight singular or multiple networked Brother MFC’s in the main BRAdmin window by highlighting and pressing the shift key on your ke

A - 11 APPENDIXAppendix ESpecificationsOperation System SupportWindows® 95/98/98SE/Me/2000/XP and Windows NT® 4.0Unix systems supporting LPDMac OS® 8.

1 - 4 UNIX PRINTING3Configure the /etc/printcap file on each host computer to specify the local print queue, the Print/Fax server name (also called re

APPENDIX A - 12Internet Fax T.37 Simple modeTiff-F Profile-SResolution: 200x100, 200x200, 204x98, 204x196dpiCoding System: MHWidth: 1728 dotFax / E-ma

A - 13 APPENDIXAppleTalk Connection Computer:Ethernet ready Power Macintosh RAM:32MB or more (64MB or more recommended) for Mac OS® 8.6 - 9.2128MB

APPENDIX A - 14Function Table and Default Factory SettingsLEVEL ONELEVEL TWOLEVEL THREE OPTIONS OPTIONSFACTORY SETTING6.LAN(MFC)4.LAN(DCP)1.Setup TCP/

A - 15 APPENDIX*1: ‘IP Address’ and ‘Subnet Mask’ setting will be changed by APIPA setting.*2: ‘NET FRAME’ setting is available when ‘NETWARE’ is ‘ON’

INDEX I - 1IINDEXAAIX ...1-3AIX 4.0 ...1-8AppleTalk ... 7-1, 7-3, 7-8, 13-2, 13-

I - 2 INDEXNNDPS ... 6-2, 6-3NDS ... 6-2NetBIOS ... 4-1, 13-8NetWare 3 ...

UNIX PRINTING 1 - 5%lpc statuslaser1:queuing is enabledprinting is enabledno entriesno daemon presentUsers of AT&T-compatible UNIX systems can gen

1 - 6 UNIX PRINTINGLinux ConfigurationIf you do not wish to use the command line interface to configure your Linux distribution, you may wish to use t

iTrademarksBrother is a registered trademark of Brother Industries, Ltd.HP, HP/UX, JetDirect and JetAdmin are trademarks of Hewlett-Packard Company.U

UNIX PRINTING 1 - 7HP-UX ConfigurationIn the case of HP-UX10.xx, the sam program is used to set up the remote printer. The steps are as follows:1Execu

1 - 8 UNIX PRINTINGEarlier versions of HP-UX use similar procedures to 10.xx users:1Enter sam and select Peripheral Devices and then Add Remote Printe

UNIX PRINTING 1 - 9The procedure for pre-V4.0 systems is as follows.1Enter smit and select devices.2Select printer/plotter.3Select manage remote print

1 - 10 UNIX PRINTINGIf this is the first printer configured, you must also use the lpsched command prior to the accept command.As an alternative, you

UNIX PRINTING 1 - 11SCO UNIX requires TCP/IP V1.2 or later to work with Brother print servers. You must first configure the /etc/hosts and /etc/printc

1 - 12 UNIX PRINTINGUse the following one-line OS/400 command to create the LPD queue:CRTOUTQ OUTQ(<queuename> RMSTSYS(*INTNETADR) RMTPRTQ(<s

UNIX PRINTING 1 - 13If you have not created a spool directory for the Brother Print/Fax server on your UNIX host computer, you will need to do so now

2 - 1 TCP/IP PRINTING22TCP/IP PrintingPrinting from Windows NT® 4.0, Windows® 2000/XP, LAN Server and Warp ServerOverviewUsers of Windows NT® 4.0 can

TCP/IP PRINTING 2 - 25Windows® 95/98/Me users can send print jobs using the IPP protocol via a Windows® 2000/XP computer provided that the Microsoft I

2 - 3 TCP/IP PRINTING3Click on Next.4You must now select the correct Network printing port. Select Create a new port and select Standard TCP/IP Port p

ii IMPORTANT NOTE:For technical and operational assistance, you must call.Calls must be made from within that country.In USA 1-800-276-7746In Canada 1

TCP/IP PRINTING 2 - 4Windows® 2000/XP Printing (Printer Driver already installed)If you have already installed the printer driver and wish to configur

2 - 5 TCP/IP PRINTING6Configure the host IP address, subnet mask, and gateway address in that dialog. Consult your system manager for these addresses.

TCP/IP PRINTING 2 - 6Windows NT® 4.0 PrintingAssociating to the PrinterYou must now create a printer on your Windows® system using the standard Window

2 - 7 TCP/IP PRINTINGWindows NT® 4.0 PrintingAdding a Second Brother LPR PortYou do not need to re-run the install program to add a new Brother LPR po

PEER TO PEER PRINTING 3 - 133Peer to Peer PrintingHow to Print in a Windows® 95/98/Me Peer to Peer networkOverviewMicrosoft's Windows® 95/98/Me o

3 - 2 PEER TO PEER PRINTINGDriver Deployment WizardThis installer includes the Windows® PCL driver and Brother network port driver (LPR and NetBIOS).

PEER TO PEER PRINTING 3 - 35Select the desired directory to install the Brother Peer to Peer Print (LPR) files and push Next. The installation program

3 - 4 PEER TO PEER PRINTING4Select Local Printer when you are asked how the printers are connected to your computer, and then push Next.5Select the co

PEER TO PEER PRINTING 3 - 5Adding a Second Brother LPR PortYou do not re-run the install program to add a new Brother LPR port. Instead, press the Sta

4 - 1 NETBIOS PEER TO PEER PRINTING44NetBIOS Peer to Peer PrintingHow to Print Using NetBIOS in Windows® 95/98/Me/2000/XP, Windows NT® 4.0, LAN Server

iiiIntroductionOverviewThe Brother NC-9100h Print / Fax Server allows your Brother machine to be attached and shared on a 10/100Mbit Ethernet Network

NETBIOS PEER TO PEER PRINTING 4 - 2Print Server ConfigurationIn order for this function to work, you must correctly change the DOMAIN name or WORKGROU

4 - 3 NETBIOS PEER TO PEER PRINTINGChanging the workgroup/domain name using a web browserYou can change the workgroup/domain name using BRAdmin Profes

NETBIOS PEER TO PEER PRINTING 4 - 4NetBIOS Port Monitor for Windows® 95/98/Me/2000/XP and Windows NT® 4.0This software requires the TCP/IP transport p

4 - 5 NETBIOS PEER TO PEER PRINTING7You must now enter the server name and port name for the actual Print/Fax server. You can use the Browse button to

NETBIOS PEER TO PEER PRINTING 4 - 64Select Local Printer when you are asked how the printer is connected to your computer, and then push Next.5Select

4 - 7 NETBIOS PEER TO PEER PRINTING7If you have selected a printer driver that is already used, you have the option of either keeping the existing dri

NETBIOS PEER TO PEER PRINTING 4 - 8Windows NT® 4.0 / Windows® 2000/XP 2Click on the Port/s tab and push the Add Port button. In the Add Port dialog, h

5 - 1 CONFIGURING INTERNET PRINTING FOR WINDOWS®55Configuring Internet Printing for Windows®Internet Printing InstallationOverviewBrother's Broth

CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 25Windows® 95/98/Me users can send print jobs using the IPP protocol via Windows® 2000 computer, provid

5 - 3 CONFIGURING INTERNET PRINTING FOR WINDOWS® At the remote site, an E-mail server receives the E-mail message. The remote Print/Fax server, which

iv IMPORTANT INFORMATION: REGULATIONSFederal Communications Commission (FCC) Declaration of Conformity (For U.S.A. only)Responsible Party: Brother Int

CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 4Brother Internet Print: Using BRAdmin Professional utility to Configure the Print ServerThe steps requ

5 - 5 CONFIGURING INTERNET PRINTING FOR WINDOWS®7The Print/Fax server is configured by default to poll the POP3 server every 10 minutes. You may chang

CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 6Brother Internet Print: Installing the BIP software on Windows® 95/98/Me/2000/XP and Windows NT® 4.0To

5 - 7 CONFIGURING INTERNET PRINTING FOR WINDOWS®9You will then be asked to enter the port settings for the remote Print/Fax server:Enter any unique le

CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 8<For Windows® 95/98/Me users>15Select the desired model of the remote printer (for example, Brot

5 - 9 CONFIGURING INTERNET PRINTING FOR WINDOWS®Adding a Second Brother Internet PortYou should not re-run the install program to add a new Brother In

CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 105When you click Next, Windows® 2000/XP will make a connection with the URL that you specified.IF THE

5 - 11 CONFIGURING INTERNET PRINTING FOR WINDOWS®Specifying a Different URLPlease note that there are several possible entries that you can enter for

NOVELL NETWARE PRINTING 6 - 166Novell NetWare PrintingHow to Configure Novell NetWare PrintingOverviewBrother Print/Fax servers allow NetWare client P

6 - 2 NOVELL NETWARE PRINTINGGeneral InformationIn order to use a Brother Print/Fax server on a NetWare network, one or more file servers must be conf

vDeclaration of Conformity (Europe)We, Brother Industries, Ltd., 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japandeclare that this product is in

NOVELL NETWARE PRINTING 6 - 3Creating a NDPS Printer Using NWADMIN for NetWare5With NetWare 5, Novell has released a new preferred printing system cal

6 - 4 NOVELL NETWARE PRINTINGNDPS BrokerWhen NDPS is installed, an NDPS broker is loaded onto the network. One of the Broker services Resource Managem

NOVELL NETWARE PRINTING 6 - 5Creating a Printer Agent Follow the steps below to create a Printer Agent for the control access printer (NDS object).1In

6 - 6 NOVELL NETWARE PRINTING5Select None for the printer Type, and Novell Port Handler for the Port Handler Type. Then click OK.6You must now specify

NOVELL NETWARE PRINTING 6 - 73One or more Print/Fax servers will appear in the list (the default node names are BRN_xxxxxx, where xxxxxx is the last s

6 - 8 NOVELL NETWARE PRINTINGCreating a Network Print Server (NDS Queue Server) using BRAdmin Professional utility1Make sure that you logged in as ADM

NOVELL NETWARE PRINTING 6 - 9eYour queue name will appear in the TREE and Context that you specified. Select the queue and click on Add. The queue nam

6 - 10 NOVELL NETWARE PRINTING7Change context if required and then double click the name of the printer you created in step 3.8Click Assignments.9Clic

NOVELL NETWARE PRINTING 6 - 1118Start the appropriate BRAdmin Professional utility, and select the correct Printer/Fax server from the list (by defaul

6 - 12 NOVELL NETWARE PRINTINGCreating a Network Print Server (NDS Remote Printer) using Novell NWAdmin and BRAdmin Professional utilityTo configure a

vi Table of ContentsIntroduction...iiiOverview...

NOVELL NETWARE PRINTING 6 - 1312Change context if necessary and select the print queue you created. Click OK and then OK again, and then exit NWADMIN.

7 - 1 PRINTING FROM A MACINTOSH®77Printing from a Macintosh®Printing from a Macintosh® Using AppleTalk® and TCP/IP or Simple Network Configuration cap

PRINTING FROM A MACINTOSH® 7 - 2Quick Tips:Macintosh® Configuration (Mac OS® 8.6 - 9.2)Your Brother Printer is compatible with the standard Apple Lase

7 - 3 PRINTING FROM A MACINTOSH®Before you try to use the Brother print server, you must first enable the EtherTalk protocol from the Network Control

PRINTING FROM A MACINTOSH® 7 - 41Open the Chooser from the Apple Menu on the Macintosh®, and then click on the LaserWriter icon (if necessary, select

7 - 5 PRINTING FROM A MACINTOSH®How to Select the Print Server (TCP/IP)Apple has developed the “Desktop Printer” utility. This can be found from the A

PRINTING FROM A MACINTOSH® 7 - 62At this point we must select the correct PPD file for the machine and also configure the correct LPR information. Cli

7 - 7 PRINTING FROM A MACINTOSH®6You are now ready to create the printer for use. To do that, click the Create button and you will see the following:F

PRINTING FROM A MACINTOSH® 7 - 8How to Select the Print Server (AppleTalk/EtherTalk)After installing the PPD, use the following steps to select the pr

7 - 9 PRINTING FROM A MACINTOSH®How to Select the Print Server (TCP/IP)After installing the PPD, use the following steps to select the printer driver:

viiWindows NT® 4.0 PrintingAssociating to the Printer... 2-6Windows NT® 4.0 PrintingAdding a Second Brothe

PRINTING FROM A MACINTOSH® 7 - 10Changing the ConfigurationFrom a Macintosh, the easiest way to change the machine or Print/Fax server parameters is t

7 - 11 PRINTING FROM A MACINTOSH®1Run the Print Center software and click the Add.2Select Rendezvous (may be changed in the future version of the Mac

PRINTING FROM A MACINTOSH® 7 - 12displayed. Select the relevant PPD file. 4The Simple Network Configuration compatible machine is displayed.5Click the

8 - 1 DLC PRINTING88DLC PrintingPrinting from Windows NT® 4.0 or Windows® 2000OverviewDLC is a simple protocol that is included in Windows NT® 4.0 and

DLC PRINTING 8 - 23Select DLC Protocol and then OK or Add if using Windows® 2000. You may be asked for the location of the files. For Intel based comp

8 - 3 DLC PRINTING9The selected print server address will then appear in the smaller box under Card Address.10Type in any desired name for the port (t

DLC PRINTING 8 - 45A list of available Print/Fax server MAC addresses (Ethernet addresses) appears in the larger box under Card Address. Select the ad

8 - 5 DLC PRINTINGThe final step is to create a printer using the normal operating system printer setup method. The only difference is that instead of

WEB BASED MANAGEMENT 9 - 199Web Based ManagementHow to use a Web Browser to manage your DeviceOverviewA standard Web Browser (we recommend Netscape Na

9 - 2 WEB BASED MANAGEMENT2To learn how to configure the IP address on your machine, see Chapter 11 of this User’s Guide.3The default password for Br

viii Brother Internet Print: Using BRAdmin Professional utility to Configure the Print Server...5-4Brother Internet Print:

FRONT PANEL SETUP MENU 10 - 11010Front Panel Setup MenuLAN Main Setup MenuWith the Network (LAN) Board (NC-9100h Print/Fax Server) installed, you can

10 - 2 FRONT PANEL SETUP MENUSetup TCP/IPThis menu has nine sections: Boot Method, IP Address, Subnet Mask, Gateway, Host Name, WINS Config, WINS Serv

FRONT PANEL SETUP MENU 10 - 3RARP modeBrother Print / Fax server IP address can be configured using the Reverse ARP (RARP) facility on your host compu

10 - 4 FRONT PANEL SETUP MENUIn order to enable BOOTP, simply use an editor to delete the “#” (if there is no “#”, then BOOTP is already enabled). The

FRONT PANEL SETUP MENU 10 - 5IP AddressThis field displays the current IP address of the DCP/MFC. If you have selected a BOOT Method of STATIC, enter

10 - 6 FRONT PANEL SETUP MENUGatewayThis field displays the current gateway or router address used by the DCP/MFC. If you are not using DHCP or BOOTP

FRONT PANEL SETUP MENU 10 - 7WINS CONFIGThis selection controls how the DCP/MFC obtains the IP address for the WINS Server.1(For MFC) Press Menu, 6, 1

10 - 8 FRONT PANEL SETUP MENUSecondary WINS Server IP AddressThis field specifies the IP address of the secondary WINS server. It is used as a backup

FRONT PANEL SETUP MENU 10 - 9APIPAThe setting of On will cause the print server to automatically allocate a Link-Local IP address in the range (169.25

10 - 10 FRONT PANEL SETUP MENUSetup Internet (For MFC only)This menu has five selections: Mail Address, SMTP Server, POP3 Server, Mailbox Name and Mai