Brother HL-4200CN User Manual download pdf (Page 86)

4 - 13 CONTROL PANEL

Network

Use Network to make or change network settings.

■ You cannot change the Network setting while the printer is processing print data.

■ You must restart the printer for settings to take effect. After programming settings, be sure to

restart the printer.

Ethernet

Use Ethernet to set Ethernet communication speed and mode.

■ Auto (default)

10Base-T Half, 10Base-T Full, 100Base-TX Half, or 100Base-TX Full is selected automatically.

■ 10Base/Half

■ 10Base/Full

■ 100Base/Half

■ 100Base/Full

TCP/IP

Use TCP/IP to make TCP/IP settings. This menu contains the following:

■ Setup IP Address

Select how to obtain an IP address. Parameters are as follows:

DHCP (default)

The IP address is obtained from a DHCP server on the network.

Panel

Use this to set the IP address from the control panel.

■ IP Address

Use this to set the IP address.

[aaa.bbb.ccc.ddd]

Set aaa, bbb, ccc, and ddd between 0 and 255.

You cannot use the following:

■ These settings are ignored when you select DHCP in Setup IP Address. To enable the settings,

select 'Panel' in 'Setup IP Address'.

■ Specifying the wrong IP address can affect the entire network. Before setting an IP address, call your

system administrator.

224.xxx.xxx.xxx or 255.xxx.xxx.xxx

127.xxx.xxx.xxx

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 165 166

No comments

Brother HL-4200CN User Manual Page 86