1 Network (LAN) boardWhen you add the optional Network (LAN) Board (NC-9100h), you can connect your MFC into the network to use the Internet FAX, Netw
2 Before starting installationBe careful when handling the NC-9100h. There are many delicate electronic components that are susceptible to damage fr
3Step 1: Hardware installationWARNINGDO NOT touch the surface of the main boards within 15 minutes after turning off the power.1Disconnect the telepho
4 3Loosen the two screws, and then remove the metal cover plate.4Plug the NC-9100h into connector P1 located on the main board as shown in the illu
5Step 2: Connecting the NC-9100h to an Unshielded Twisted Pair 10BASE-T or 100BASE-TX Ethernet NetworkTo connect the NC-9100h to a 10BASE-T or 100BAS
6 Active LED is yellow:The Active LED will blink if the print server is receiving or transmitting data.TEST SWITCHShort push: Prints the network co
Comments to this Manuals