Brother PT-7500 User Manual download pdf (Page 32)

Label Type Modes

● BLK LEN. (block length): * For the PORT Label Type mode:

0.80" to 8.00" (20.0 to 200.0 mm)

Default: 1.20" (30.0 mm)

* For the PANEL1 Label Type mode:

0.25" to 8.00" (6.0 to 200.0 mm)

Default: 1.20" (30.0 mm)

● FRAME: * For the PORT Label Type mode:

OFF, , , ,

Default: OFF

* For the PANEL1 Label Type mode:

OFF, 1 , 2 , 3 ,

4 , 5 , 6 ,

7 , 8 , 9

Default: OFF

● PRINT (print order): FRONT, REVERSE

Default: FRONT

Panel2 Mode

Specifying a fixed length for each block makes

this label useful for a row of switches (for

example, in a switchboard) or a patch panel. In

addition, the text blocks can be printed in the

order that they were typed in or in the opposite

order, or the text can be printed rotated 90°.

☞ For these types of labels, we recommend using Extra Strength Adhesive Tape.

☞ The PRINT parameter is only available with the PANEL1 Label Type mode.

☞ By using the Numbering function with the PANEL1 Label Type mode, a single label

containing multiple blocks of ascending characters can easily be created, for example,

to label patch panels as shown above. (For details on the Numbering function, refer to

Printing multiple copies with incremental characters on page 36.)

Panel2

Block lengthBlock length Block length

Block 2Block 1 Block 3

(Length × Multiple) (Length × Multiple) (Length × Multiple)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 102 103

No comments

Brother PT-7500 User Manual Page 32