Brother PT-9200DX User Manual download pdf (Page 14)

For Windows®

4 Select the desired baud rate, and then click the Next

button.



Normally “115,200 bps” is selected; however,

your computer may not be able to support a baud

rate of 115,200 bps. If this is the case, refer to the

your computer’s instruction manual and select the

maximum possible baud rate.

A dialogue box appears, asking for confirmation of

the selected baud rate settings.

5 Check that the baud rate will be changed as desired,

and then click the Next button.



To change the settings, click the Back button, and

return to step 4.

A dialogue box appears, showing that the baud rate

has been set as specified.

6 Click the Finish button.

For a USB connection (Windows

98/Me/2000 Professional/XP only)

With Plug-and-Play, new devices connected to the system

are detected, and their drivers are automatically installed. If

the PT-9200DX is to be connected through the USB port, its

driver will be installed with Plug-and-Play. Be sure to read

the installation instructions described below before install-

ing the file supplied on the CD-ROM.



Do not connect the P-touch 9200DX to the computer

until you are instructed to do so, otherwise the PT-

9200DX printer driver may not be installed correctly.

With Windows

98/98SE/Me/2000 Professional:

1 Select “USB cable”, and then click the OK button.

The USB message dialogue box appears.

2 Click the Next button. A dialogue box appears,

instructing you to connect the PT-9200DX to the

computer.

3 Connect the PT-9200DX to the computer using the

enclosed USB interface cable as described on page 5,

and then turn on the PT-9200DX. A dialogue box

appears, showing that the printer driver has been

installed.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 231 232

Comments to this Manuals

No comments

Brother PT-9200DX User Manual Page 14

Comments to this Manuals

Related products and manuals for Printers Brother PT-9200DX