Brother PT-9200DX User Manual download pdf (Page 9)

1 Connect one end of the enclosed USB interface cable to the USB connector ( ) of the PT-9200DX and the other

end of the cable to the USB port of the computer.



Do not connect the PT-9200DX to the computer using both the serial and the USB interface cables, otherwise

the PT-9200DX may be damaged.



When making a USB connection through a hub, a proper connection may not be possible due to the type of

hub used. If printing is not possible with a hub connection, try connecting the PT-9200DX directly to the

computer using the USB interface cable.

2 Insert the plug on one end of the power supply cord into the power supply jack on the PT-9200DX.

3 Insert the plug on the other end of the power supply cord into an AC outlet equipped with a grounding terminal.

Some locations may require the use of an adapter provided with a grounding wire. Connect this wire to the ground

terminal.

USB

When connecting to the USB port:



You must install the software first before connecting to the USB interface or turning on the power. Please follow the

installation procedures on pages 6 through 12 before connecting up or turning the power on. The Brother P-touch

installation software will instruct you when to do this.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 231 232

No comments

Brother PT-9200DX User Manual Page 9