Brother 885-U22 Instruction Manual Page 159

  • Download
  • Add to my manuals
  • Print
  • Page
    / 168
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 158
Troubleshooting 157
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
4
While winding the
bobbin, the bobbin
thread was wound
below the bobbin
winder seat.
You have not wound the bobbin
thread properly.
After removing the thread wound
below the bobbin winder seat,
wind the bobbin correctly.
page 151
Bobbin thread does
not wind neatly on
the bobbin.
The thread is not passed through the
bobbin-winding thread guide
correctly.
Correctly pass the thread through
the bobbin-winding thread guide.
page 24
Bobbin spins slowly.
Move the sewing speed controller
to the right (so that the speed will
be fast).
page 25
The thread that was pulled out was
not wound onto the bobbin
correctly.
Wind the thread that was pulled
off round the bobbin five or six
times clockwise.
page 25
Fabric being sewn
with the machine
cannot be removed.
Thread is tangled below the needle
plate.
Lift up the fabric and cut the
threads below it, and clean the
race.
page 148
The fabric feeds in
the opposite
direction.
The feed mechanism is damaged.
Contact your dealer or the nearest
authorized service center.
The upper thread
has tightened up.
The bobbin thread is incorrectly
installed.
Correctly install the bobbin
thread.
page
26, 144
The thread is
tangled on the
wrong side of the
fabric.
You have not threaded the upper
thread properly.
Correct the upper threading.
page
28, 145
Symptom Probable Cause Remedy Reference
Page view 158
1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 167 168

Comments to this Manuals

No comments