Brother 885-U22 Instruction Manual download pdf (Page 43)

Replacing the Presser Foot 41

—

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

—

Replacing the Presser Foot

The presser foot presses down on the fabric.

Presser foot precautions

Be sure to observe the following precautions

concerning the presser feet.

CAUTION

Replacing the presser foot

Replace the presser foot as described below.

For details on using the side cutter “S”, refer to

“Sewing overcasting stitches using the optional side

cutter” (page 78).

Press (“Needle Position” button) once or

twice to raise the needle.

a “Needle Position” button

X The needle is raised.

Turn off the sewing machine.

CAUTION

Raise the presser foot lever.

a Presser foot lever

X The presser foot is raised.

● Use the presser foot appropriate for the

type of stitch that you wish to sew,

otherwise the needle may hit the presser

foot, causing the needle to bend or break.

● Only use presser feet designed specifically

for this sewing machine. Use of any other

presser foot may result in injuries or

damage to the machine.

● Before replacing the presser foot, be sure

to turn off the sewing machine, otherwise

injuries may occur if (“Start/Stop”

button) is accidentally pressed and the

machine starts sewing.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 167 168

No comments

Brother 885-U22 Instruction Manual Page 43