Brother 885-U22 Instruction Manual download pdf (Page 33)

Upper Threading 31

—

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

—

Threading the needle

This section describes how to thread the needle.

Memo

z The needle threader can be used with

sewing machine needles 75/11 through

100/16.

z The needle threader cannot be used with the

wing needle or the twin needle.

z If the needle threader cannot be used, refer

to “Threading the needle manually (without

using the needle threader)” (page 33).

Pull the end of the thread, which has been

passed through the needle bar thread guide, to

the left, then pass the thread through the notch

of the thread guide 1, and then firmly pull the

thread from the front and insert it into the slit

of the thread guide disk marked “7” all the

way 2.

Make sure that the thread passes the notch of

the thread guide.

a Notch of the thread guide

b Thread guide disk

Cut the thread with the thread cutter on the

left side of the machine.

a Thread cutter

Note

z If the thread is pulled through and cannot be

cut correctly, lower the presser foot so that

the thread is held in place before cutting the

thread. If this operation is performed, skip

step

z When using thread that quickly winds off the

spool, such as metallic thread, it may be

difficult to thread the needle if the thread is

cut.

Therefore, instead of using the thread cutter,

pull out about 80 mm (approx. 3 inches) of

thread after passing it through the thread

guide disks (marked “7”).

a 80 mm (3 inches) or more

Lower the presser foot lever to lower the

presser foot.

a Presser foot lever

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 167 168

Comments to this Manuals

No comments

Brother 885-U22 Instruction Manual Page 33

Comments to this Manuals

Related products and manuals for Sewing machines Brother 885-U22