Brother Computerized Sewing Machine Instruction Manual download pdf (Page 36)

GETTING READY —————————————————————————————————————————————————————————————————————————————————————————————————————

——

Lower the presser foot lever, insert the presser

foot holder screw, and then tighten the screw

with the screwdriver.

a Presser foot holder screw

Note

● When sewing with the walking foot, sew at

a speed between slow and medium.

■ Removing the walking foot

Press (needle position button) once or

twice to raise the needle.

a Needle position button

X The needle is raised.

Turn off the sewing machine.

Raise the presser foot lever.

a Presser foot lever

X The presser foot is raised.

With a screwdriver, loosen the presser foot

holder screw, and then remove the walking

foot.

a Presser foot holder screw

Attach the presser foot holder.

• For details, refer to “Removing the presser

foot holder” (page 32).

Memo

● Only the straight stitch (with reinforcement

stitching) and the zigzag stitch can be used

with the walking foot. For details on the

stitches, refer to “Stitch settings” (page 87).

● The optional walking foot is available

through your Brother dealer.

● Be sure to securely tighten the screw with the

screwdriver, otherwise the needle may touch

the presser foot, causing it to bend or break.

● Before starting to sew, slowly turn the

handwheel toward you (counterclockwise)

and check that the needle does not touch the

presser foot. If the needle hits the presser

foot, the needle may bend or break.

CAUTION

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 103 104

No comments

Brother Computerized Sewing Machine Instruction Manual Page 36