Brother FS-20 User Manual download pdf (Page 51)

——

—————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

Use a chalk to mark on the fabric about 5 mm

(3/16 inch) from the edge of the fabric, and

then baste it.

a Wrong side of fabric

b Right side of fabric

c Edge of fabric

d Basting stitching

e 5 mm (3/16 inch)

Fold back the fabric inside along the basting.

a Wrong side of fabric

b Edge of fabric

c Basting

d 5 mm (3/16 inch)

Unfold the edge of fabric, and position the

fabric with the wrong side facing up.

a Wrong side of fabric

b Right side of fabric

c Basting

d Edge of fabric

Attach blind hem foot “R”.

Select a stitch.

Remove the flat bed attachment and make

free-arm sewing possible.

• For details on free-arm sewing, refer to

“Stitching cylindrical pieces” (page 44).

Slide the part that you wish to sew onto the

arm, make sure that the fabric feeds correctly,

and then start sewing.

a Arm

Position the fabric with the edge of the folded

hem against the guide of the presser foot, and

then lower the presser foot lever.

a Wrong side of fabric

b Fold of hem

c Guide

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 99 100

No comments

Brother FS-20 User Manual Page 51