Brother S-1110A Instruction Manual download pdf (Page 9)

S-1110A

3. TABLE

4. MOTOR

3. TABLE

Table processing diagram

・ The top of the table should be 40 mm in thickness and should be strong enough to hold the weight and with-stand the

vibration of the sewing machine.

・ Drill holes as indicated in the illustration below.

4. MOTOR

CAUTION

All cords should be secured at least 25 mm away from any moving parts. Furthermore, do not excessively bend the

cords or secure them too firmly with staples, otherwise there is the danger that fire or electric shocks could occur.

Install the correct belt cover which corresponds to the motor being used.

< Motor >

・ Use one of the clutch motors given in the table at right as the motor.

・ Refer to the instruction manual for the motor for details on installing and

using the motor.

< Motor pulley and V-belt >

Select the correct motor pulley and V-belt by referring to the table below to suit the power frequency of your area.

50Hz 60Hz

Sewing speed

Motor pulley

(Outer diameter)

V-belt Motor pulley

(Outer diameter)

V-belt

5,000rpm 130 45 115 44

4,000rpm 110 44 90 43

3828M

Cotton stand hole

Ground wire hole

Head rest hole

Motor mounting holes

Power Motor

Single-phase 2-pole, 400 W motor

Three-phase 2-pole, 400 W motor

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

No comments

Brother S-1110A Instruction Manual Page 9