Brother XL-6063 User Manual Page 40
- Page / 101
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
29
KNOWING YOUR SEWING MACHINE
CONOZCA SU M
ÁQUINA DE COSER
CONOSCERE LA MACCHINA DA CUCIRE
1
3
2
2. Pass the end of the thread through the hole on the bobbin from
the inside.
Place the bobbin onto the bobbin winder shaft and slide the
bobbin winder shaft to the right. Turn the bobbin clockwise, by
hand, until the spring on the shaft slides into the groove of the
bobbin.
1 Spring on the shaft
2 Groove of the bobbin
3 Bobbin winder seat
3. While holding the end of the thread, gently depress the foot
controller to wind the thread around the bobbin a few times.
Then stop the machine.
Trim the excess thread above the bobbin.
4. Step down on the foot controller to start.
5. After the machine stops automatically when the bobbin is full,
take your foot off of the foot controller.
CAUTION
When removing the bobbin, do not pull on the bobbin winder
seat. Doing so could loosen or remove the bobbin winder seat,
resulting in damage to the machine.
6. Cut the thread, slide the bobbin winder shaft to the left and
remove the bobbin.
NOTE:
The needle bar does not move when the bobbin winding shaft is slid
to the right.
Immediately after winding the bobbin, it is normal to hear the sound
of the clutch engaging when beginning to sew or manually turning
the balance wheel.
CAUTION
Be sure to follow the process described. If the thread is not
cut completely, and the bobbin is wound, when the thread
runs low it may tangle around the bobbin and cause the
needle to break.
CAUTION
Setting the bobbin improperly may cause the thread ten-
sion to loosen, breaking the needle and resulting in injury.
1 Wound evenly
2 Wound poorly
12
- “IMPORTANTES INSTRUCCIONES DE 2
- SEGURIDAD” 2
- TABLE OF CONTENTS 9
- CONTENIDO 10
- INDICE DEGLI ARGOMENTI 11
- PRINCIPAL PARTS 12
- PARTI PRINCIPALI 13
- ELEMENTOS PRINCIPALES 13
- ACCESSORIES 14
- ACCESSORI 15
- ACCESORIOS 15
- SEWING MACHINE 16
- OPERATING YOUR 16
- FUNZIONAMENTO DELLA 17
- MACCHINA DA CUCIRE 17
- FUNCIONAMIENTO DE LA 17
- MÁQUINA DE COSER 17
- Main Power/Sewing 18
- Light Switch 18
- Foot Controller 19
- Reostato a pedale 19
- Checking the Needle 20
- Replacing the Needle 20
- Controllo dell’ago 21
- Sostituzione dell’ago 21
- Verificación de la aguja 21
- Cambio de la aguja 21
- Changing the Presser Foot 22
- Cambio del prensatelas 22
- Flat Bed Attachment 23
- Plataforma 23
- Scomparto piano 23
- VARIOUS CONTROLS 24
- DISTINTOS MANDOS 25
- DISPOSITIVI DI CONTROLLO 25
- Stitch Length Dial 35
- Selector de largo de puntada 36
- Reverse Sewing Lever 37
- Pulsador de retroceso 37
- Tasto di cucitura di ritorno 37
- Converting to Free-arm Style 38
- Cucitura a braccio libero 38
- THREADING 39
- THE MACHINE 39
- PROCEDURE DI INFILATURA 39
- ENHEBRADO DE LA 39
- PRECAUCIÓN 41
- ATTENZIONE 41
- Lower Threading 42
- Infilatura inferiore 43
- Enhebrado inferior 43
- Upper Threading 44
- Infilatura superiore 45
- Enhebrado superior 45
- Drawing Up Lower Thread 46
- Tiraggio del filo inferiore 46
- Levantar el hilo inferior 46
- Twin Needle Sewing 47
- Cucitura con ago gemello 47
- Costura con aguja doble 47
- Thread Tension 49
- Tensione del filo 49
- Tensión de los hilos 49
- COMBINAZIONE TESSUTO/FILO/AGO 51
- PLEASE READ BEFORE SEWING 52
- LEGGERE PRIMA DI CUCIRE 52
- Straight Stitching 53
- Punto diritto 53
- Puntadas rectas 53
- Zigzag Stitching 56
- Punto zigzag 56
- Puntadas zigzag 56
- Blind Hem Stitching 57
- Punto orlo invisibile 57
- Puntadas invisibles 57
- Shell Tuck Stitching 58
- Punto conchiglia 58
- Puntada ondas 58
- Elastic Stitching 59
- Punto elastico 59
- Puntada elástica 59
- Double Action Stitching 60
- Punto doppio 60
- Puntada de acción doble 60
- Scallop Stitching 61
- Punto smerlo 61
- Puntada festón 61
- Decorative Stitching 62
- Punto decorativo 62
- Puntadas decorativas 62
- Patchwork 63
- Lavori di patchwork 63
- Overedge Stitching 64
- Rifinitura a sopraggitto 64
- Making a Buttonhole 66
- (For 1-step BH Type) 66
- Esecuzione di un occhiello 67
- Para coser ojales 67
- Buttonhole Fine Adjustment 72
- Ajuste fino de los ojales 73
- Button Sewing 75
- Costura de botones 75
- Cucitura di bottoni 75
- Zipper Insertion 76
- Gathering 76
- Applicazione di cerniere 77
- Arricciature 77
- Inserción de cremalleras 77
- Fruncido 77
- Rammendo 78
- Appliqués 79
- Applicazioni 79
- Aplicaciones 79
- Monogramming and 80
- Embroidering 80
- Monogrammi e ricami 81
- Monogramas y bordados 81
- OPTIONAL ACCESSORIES 82
- ACCESSORI OPZIONALI 83
- ACCESORIOS OPCIONALES 83
- Changing the Light Bulb 88
- Sostituzione della lampadina 89
- Cambio de la bombilla 89
- Cleaning 90
- Limpieza 91
- PERFORMANCE CHECK LIST 92
- (Not available on models 93
- XL-6040, XL-6041 93
- XL-6042, and XL-6043) 93
- ( No disponible en los 95
- (Non disponibile sui 97
- 6041, XL-6042 e XL6043) 97
- IMPORTANT 98
- IMPORTANTE 98
Related products and manuals for Sewing machines Brother XL-6063
Sewing machines Brother 888-X56 User Manual
(40 pages)
(40 pages)
Sewing machines Brother LS-1717 User Manual
(82 pages)
(82 pages)
Sewing machines Brother BM-3500 User Manual
(81 pages)
(81 pages)
Sewing machines Brother PR650e User Manual
(12 pages)
(12 pages)
Sewing machines Brother DS-140 User Manual
(104 pages)
(104 pages)
Sewing machines Brother Innov-is 35 User Manual
(108 pages)
(108 pages)
Sewing machines Brother RH127 User Manual
(48 pages)
(48 pages)
Sewing machines Brother Innov-is V5 User Manual
(312 pages)
(312 pages)
(2 pages)
Sewing machines Brother XN2500 User Manual
(48 pages)
(48 pages)
Sewing machines Brother 4234D User Manual
(80 pages)
(80 pages)
Sewing machines Brother PR-650 User Manual
(280 pages)
(280 pages)
© 2020, manymanuals.com. All rights reserved. | 0.601 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals