Brother DCP-7055 User Manual download pdf (Page 68)

100

The machine prints unexpectedly

or it prints garbage.

 Press Job Cancel to cancel print jobs.

 Check the settings in your application to make sure it is set up to work with

your machine.

 Pull out the paper tray and wait until the machine stops printing. Then turn off

the machine’s power switch and disconnect from the power for several

minutes.

The machine prints the first couple

of pages correctly, then some

pages have text missing.

 Check the settings in your application to make sure that it is set up to work with

your machine.

 Your computer is not recognising the machine’s input buffer’s full signal. Make

sure that you connected the interface cable correctly. (See the Quick Setup

Guide.)

The headers or footers appear

when the document displays on the

screen but they do not show up

when it is printed.

There is an unprintable area on the top and bottom of the page. Adjust the top and

bottom margins in your document to allow for this. (See Unscannable and

unprintable areas on page 13.)

The machine does not print on both

sides of the paper even though the

printer driver setting is Duplex.

Check the paper size setting in the printer driver. You need to choose A4 [60 to

105 g/m

The machine is not printing or has

stopped printing.

Press Job Cancel.

As the machine cancels the job and clears it from the memory it may produce an

incomplete printout.

Scanning difficulties

Difficulties Suggestions

TWAIN errors appear while

scanning.

Make sure that the Brother TWAIN driver is chosen as the primary source. In

Presto! PageManager, click File, Select source and choose the Brother TWAIN

driver.

OCR does not work. Try increasing the scanning resolution.

(Macintosh users)

Presto! PageManager must be downloaded and installed before use. See

Accessing Brother Support (Macintosh) on page 3 for further instructions.

Software difficulties

Difficulties Suggestions

Cannot install software or print. Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair

and reinstall the software.

Cannot perform ‘2 in 1’ or ‘4 in 1’

printing.

Check that the paper size setting in the application and in the printer driver are the

same.

The machine does not print from

Adobe

Illustrator

Try to reduce the print resolution. (See Advanced tab in the Software User's

Guide.)

Printing difficulties (continued)

Difficulties Suggestions

1 ... 67 68 69 ... 100

Comments to this Manuals

No comments

Brother DCP-7055 User Manual Page 68

Comments to this Manuals

Related products and manuals for Copiers Brother DCP-7055