Brother MFC-3200C User Manual download pdf (Page 100)

10 - 4

REMOTE FAX OPTIONS (NOT AVAILABLE FOR COLOR FAXES)

MFC3200C-US-FM6.0

Remote Commands

Follow the commands below to access features remotely. When you call the

MFC and enter your Remote Retrieval Access Code (1 5 9 ), the system will

signal you with two short beeps to enter a remote command.

Remote Commands Operation Details

95 Change Fax Forwarding

/Paging setting

1 OFF If you hear one long beep, the change is accepted. If you hear three

short beeps, you cannot change it because the conditions have not

been met (Example: registering paging number). You can register

your fax forwarding number by using 4. FAX FWD NO. (see page

10-5). Once you have registered the number, the MFC will change

automatically to FAX FWD:ON mode.

2 Fax Forwarding

3 Paging

4 FAX FWD No.

6 Fax Storage ON You can turn FAX STORAGE to ON or OFF.

7 Fax Storage OFF

96 Retrieve a fax

2 Retrieve all faxes Enter the number of a remote fax machine to receive stored fax

message(s). (See page 10-5.)

3 Erase fax from the memory If you hear one long beep, you can erase fax message(s) from the

memory.

97 Check the Receiving Status

1 FAX You can check whether your MFC has received any faxes. If yes,

you will hear one long beep. If no, you will hear three short beeps.

98 Change Receive Mode

1 TAD: ANSWER MACH. If you hear one long beep, you can change the Receive Mode.

If you hear three short beeps, you cannot change it.

2 FAX/TEL

3 FAX ONLY

Exit After a long beep, you can exit remote retrieval.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 265 266

No comments

Brother MFC-3200C User Manual Page 100