Brother P-touch PT-9400 User's Guide download pdf (Page 85)

Ch. 4 Using Labels and Stamps

Using Labels and Stamps

●

Laminated tape

The backing from labels printed on laminated

tapes can easily be removed if a half cut setting

was used (refer to page 70). However, if a half

cut setting was not used, the backing paper can

be removed by using the enclosed lettering

stick.

1 Hold the tape in your left hand, with the

printed surface facing up, and hold the let-

tering stick in your right hand.

2 Pass the tape halfway through the long nar-

row hole in the stick.

3 Turn the stick three quarters of a turn

towards you and pull the stick away from

you as shown below.

4 Peel off the label backing.

●

Non-laminated tape

5 Slightly fold labels printed on non-lami-

nated tape in half so that the inside edges of

the two backing pieces come off the label,

enabling them to be peeled off easily.

●

Instant-lettering tape

By printing your text on instant-lettering tape

(rub-on transfers), you can transfer the text

directly onto a sheet of paper.

1 Place the label with its printed side facing

down on the paper.

2 Rub the label’s non-printed side with the

enclosed lettering stick.

ABCDEF

NOTE

☞ Hold the label very firmly so that it does not

move while you transfer the text.

ABC

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 125 126

No comments

Brother P-touch PT-9400 User's Guide Page 85